Radial shaft seal DBH 5928 — 150.00 x 180.00 x 18.00

DBH 5928 is a radial shaft seal reference, within Seals. Request a quote for 5928 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 5928 radial shaft seal is a lip seal mounted on the shaft to retain lubricant and block the entry of dust, water or particles. With a 150 mm shaft, 180 mm housing and 18 mm height, it is used in gearboxes, pumps and rotating equipment where bearings must be protected and leaks prevented. MR Accesorios Industriales carries this brand and helps you confirm the correct variant for your equipment.

This item is a radial shaft seal from the DBH line, identified by the code 5928. Its dimensions are 150 mm shaft, 180 mm housing and 18.00 mm height, with Lx design. The Lx design corresponds to a single-lip seal with spring, intended for rotating shafts with lubrication. Before mounting it, verify that the shaft diameter, housing diameter and cavity width match these values, because an out-of-size seal does not seal properly and can damage the shaft or the housing.

Typical applications for a seal of this size are in transmission and pumping equipment: gearboxes, large electric motors, centrifugal pumps, mixers and rolls of process machines. In all cases it performs the same function: keeping oil or grease inside the assembly and preventing the entry of contaminants that accelerate wear on bearings and gears. It is also used as a closure in equipment where lubricant loss through the shaft must be avoided.

To select the seal correctly, in addition to the dimensions, take into account the shaft speed, working temperature and type of lubricant. The Lx design with single lip and spring is suitable for rotating shafts with continuous lubrication. During mounting, lubricate the lip before inserting it, avoid hitting it and check it with a flat tool so that it enters perpendicular. If the shaft is worn or scratched, consider a wear sleeve or a variant with an auxiliary lip.

If you need an equivalent or a nearby size, send us the code 5928 together with the shaft, housing and height dimensions. A photo of the old seal or the assembly drawing is also helpful. With that data we can look for an alternative within the same DBH line or from another brand we carry, always respecting the dimensions and design type. You do not need to have the original part number: with the correct dimensions it can be identified.

To request a quote for the DBH 5928 seal or ask about a similar size, write to us on WhatsApp at MR Accesorios Industriales. Tell us what equipment you are repairing and the dimensions you need. We reply with the options and the technical information so you can choose well.