Radial shaft seal DBH 5883 — 38.00 x 74.00 x 10.00

DBH 5883 is a radial shaft seal reference, within Seals. Request a quote for 5883 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 5883 seal is a radial seal with a 38 mm shaft diameter, 74 mm housing and 10 mm height. Its Lx design combines a sealing lip and a dust lip, which improves protection against dust and dirt in environments with particles. It is used in gearboxes, pumps, electric motors and power transmission equipment to retain lubricant and prevent the entry of contaminants. MR Accesorios Industriales carries this brand and advises you to choose the correct seal.

The DBH 5883 is a radial shaft seal with the following dimensions: shaft diameter 38 mm, housing diameter 74 mm and height 10 mm. The Lx design indicates that it has a main sealing lip and an outer dust lip, intended for applications where there is exposure to dust or dirt. The lip elastomer works on the rotating shaft, while the outer diameter is static in the housing. This configuration is common in equipment that requires an additional barrier against contaminants without the need for an auxiliary seal.

Typical applications for this seal include gearboxes, reducers, centrifugal pumps, electric motors and conveyor rollers. In all cases, the seal fulfills the function of retaining the oil or grease inside the assembly and preventing dust, water or metal particles from entering the bearings. It is frequently found in industrial equipment where the shaft rotates at moderate speeds and the working temperature does not exceed the limits of the standard elastomer. If the equipment operates in very dirty environments, the dust lip of the Lx design helps extend the service life of the seal.

For installation, verify that the shaft has the appropriate hardness and surface finish, without burrs or marks that could damage the lip. Lubricate the lip with the same oil or grease as the equipment before inserting it into the housing. It is essential that the seal enters perpendicular to the shaft and that the spring remains on the side of the fluid to be retained. If the housing shows wear, evaluate the use of a seal with an oversized outer diameter or a repair sleeve. Correct alignment between shaft and housing prevents premature leaks and noise.

If you need a seal equivalent to the DBH 5883 or a nearby size, the most practical thing is to send us the complete part number or the exact shaft, housing and height dimensions. You can also send us a photo of the part and the housing to confirm the lip type and material. At MR Accesorios Industriales we have more than 80 years of experience in seals and oil seals, and we can guide you on the best option according to the application. Do not hesitate to ask us about alternatives.

To request a quote for the DBH 5883 seal or any other size in the DBH line, write to us by WhatsApp and send us the part number or the dimensions. We will reply with the quote and the purchase options. MR Accesorios Industriales carries this brand and can advise you technically so that you choose the right seal for your equipment. Remember that we also manufacture split plummer block housings, ANSI chains and pulleys, and we distribute bearings, power transmission and lubricants.