DBH 5882 radial shaft seal — 54 x 72 x 10

DBH 5882 is a reference of radial shaft seal, within Seals. Request a quote for 5882 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 5882 radial shaft seal is a lip seal that mounts in the housing and seals against the shaft to retain lubricant and block the entry of dust, water or particles. With a 54 mm shaft, 72 mm housing and 10 mm height, and Lx design, it is a common size in industrial equipment. MR Accesorios Industriales carries this brand and helps you confirm the size before requesting a quote.

This item is a DBH 5882 radial shaft seal, with the following dimensions: shaft diameter 54 mm, housing diameter 72 mm and height 10 mm. The Lx design indicates the lip and metal body configuration. It is a single lip seal, intended for rotating shafts with lubrication. Before ordering it, it is advisable to verify that the housing and shaft match these dimensions, because a seal with different dimensions will not seal properly.

It is used in gearboxes, pumps, electric motors, rollers and power transmission equipment where a shaft rotates inside a housing and it is necessary to retain oil or grease. It also appears in older or imported machines where the 54 x 72 x 10 size is not the most common. In those cases, the DBH 5882 seal is usually the option to replace the original seal without modifying the housing.

To install it, clean the housing and shaft, verify there are no burrs or marks that could damage the lip, and lubricate the seal before inserting it. The selection depends on shaft speed, temperature and the type of lubricant. If the equipment works with a lot of vibration or dirt, a seal with a dust lip may be advisable. If the shaft is worn, it is sometimes solved with a wear sleeve. MR Accesorios Industriales can guide you with these criteria.

If you need an equivalent, send us the part number 5882 or the dimensions 54 x 72 x 10 by WhatsApp. We can also look for a seal with the same shaft and housing diameter but a different height, or with another lip design. The more data you give us — dimensions, type of lubricant, working temperature — the faster we can quote you. If you can't find the exact size, ask us.

To request a quote for the DBH 5882 seal, write to us by WhatsApp with the part number and the quantity you need. MR Accesorios Industriales carries this brand and can advise you on the application. Remember that the size must match the shaft and housing; if you have doubts, send us a photo of the old seal or the dimensions taken with a caliper. That way we can give you the quote without hassle.