DBH 5816Vit radial shaft seal — 10 x 22 x 8

DBH 5816Vit is a reference of radial shaft seal, within Seals. Request a quote for 5816Vit via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 5816Vit oil seal is a radial seal with 10 mm shaft, 22 mm housing and 8 mm height, with Lz design. It is used to retain lubricant and exclude contaminants on rotating shafts, within assemblies where axial space is limited. Its sealing lip works on the shaft and its outer diameter seats under pressure in the housing. It is a wear part: it is replaced when oil loss or dirt ingress appears. MR Accesorios Industriales carries this brand and helps you identify the correct size.

This item is a DBH radial shaft seal with the 5816Vit designation. Its dimensions are 10 mm shaft diameter (d), 22 mm housing diameter (D) and 8 mm height (h). The Lz design corresponds to the lip geometry and the type of case. Part number 5816Vit identifies the size and design within the DBH line. Before installing it, verify that the shaft and housing match these values, because a seal of another size will not seal even if it looks similar.

Typical applications of a 10 x 22 x 8 mm seal are pumps, small electric motors, gearboxes, compressors, machine tools and transmission equipment. In all cases it fulfills two functions: retain the oil or grease inside the assembly and prevent the ingress of dust, water or particles. It is also used on fan shafts, agitators and small rollers. If the equipment works with a lot of dirt or frequent washing, it is advisable to check the condition of the lip more often.

To select and install a radial shaft seal, take into account the shaft speed, working temperature and type of lubricant. The lip must be lubricated before installation and the shaft must not have burrs or deep marks in the contact area. The seal is inserted perpendicular to the shaft, with a tube or socket of suitable diameter, without hitting the lip. If the housing has a chamfer, respect the seating so that the seal sits fully and is not tilted.

If you need an equivalent, send us part number 5816Vit along with the shaft, housing and height dimensions, and a photo of the old seal if possible. The part number engraved on the part or the equipment model also helps. With that data we indicate the alternative in the same series or in another brand we carry. The seal does not have to be identical: sometimes a close standard size solves the replacement.

To request a quote for the DBH 5816Vit oil seal, write to us on WhatsApp at MR Accesorios Industriales with the part number and the quantity you need. If you have doubts about the size, send the shaft and housing dimensions and we will confirm the correct designation. We can also advise you on installation and lip lubrication so that the seal lasts as expected. MR carries this brand within its line of seals and oil seals.