DBH 5795 radial shaft seal — 44.95 x 66.62 x 12.7

DBH 5795 is a reference of radial shaft seal, within Seals. Request a quote for 5795 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 5795 radial shaft seal is a lip seal mounted on the shaft and inside the housing to retain oil or grease and keep contaminants out. With dimensions of 44.95 mm shaft diameter, 66.62 mm housing diameter and 12.70 mm height, and an Mz design, it is a replacement part for rotating equipment. At MR Accesorios Industriales we carry it as a brand and advise you so you choose the right seal.

This item is a radial shaft seal from the DBH brand, identified with part number 5795. Its dimensions are 44.95 mm shaft diameter (d), 66.62 mm housing diameter (D) and 12.70 mm height (h). The Mz design corresponds to a specific construction configuration within the DBH seal line. It is a lip seal that works in direct contact with the shaft, generally with a spring that ensures closing pressure. It is not a generic component: each size responds to a specific housing and shaft, so the 5795 designation is the exact reference you need to verify before ordering it.

Radial shaft seals such as the DBH 5795 are used in gearboxes, pumps, electric motors, drive shafts and rotating equipment where lubricant must be contained and dust or moisture blocked. They also appear in agricultural machinery, process equipment and industrial assemblies in general. Their function is twofold: keep the oil inside the assembly and prevent external agents from entering the bearings or gears. When the seal wears, lubricant loss or dirt ingress appears, and that is when it should be replaced with one of the same dimensions and design.

To install a radial shaft seal, keep in mind that the shaft must not have burrs or marks that damage the lip, and that the housing must be clean and free of deformation. The shaft and housing dimensions must match those of the seal; in this case, 44.95 mm and 66.62 mm respectively. The Mz design defines the lip profile and the type of case, so if the original is Mz, it is advisable to keep that configuration. The 12.70 mm height also matters: a taller or shorter seal may not seat properly. If in doubt, consult us with the measurement taken on the equipment.

If you need an equivalent, the most practical thing is to send us part number 5795 or DBH 5795 on WhatsApp, along with the measurements you have taken from the shaft and housing. A photo of the old seal or the housing also helps. With that data we indicate the alternative within the DBH line or other brands we carry. Not all sizes are interchangeable, but many times there is a close option that fulfills the function. At MR Accesorios Industriales we help you find the right part without hassle.

MR Accesorios Industriales carries the DBH brand as a brand. If this DBH 5795 seal is the one you are looking for, or if you want us to review an equivalent size, write to us on WhatsApp and send us the part number. We reply with the technical information and the corresponding quote. We can guide you on installation, compatibility and alternatives within our catalog of seals and oil seals.