Radial shaft seal DBH 5794 — 41.28 x 66.62 x 12.70

DBH 5794 is a radial shaft seal reference, within Seals. Request a quote for 5794 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 5794 radial shaft seal is a lip seal designed to retain lubricant and exclude contaminants on rotating shafts. With dimensions of 41.28 mm shaft diameter, 66.62 mm housing diameter and 12.70 mm height, and an Mz design, it is press-fitted into the housing and runs against the shaft. It is a key component in gearboxes, pumps, electric motors and power transmission equipment, where it prevents leaks and protects the bearings.

The DBH 5794 is a radial lip seal with the following dimensions: shaft diameter 41.28 mm, housing diameter 66.62 mm and height 12.70 mm. Its Mz design corresponds to a configuration with a sealing lip and metal case, suitable for press fitting into a cylindrical housing. The 5794 designation identifies the size and construction type within the DBH line. This seal is made with an elastomer resistant to oils and greases, and a metal reinforcement that gives it rigidity to withstand mounting pressure and shaft rotation.

Typical applications for this seal include gearboxes, centrifugal pumps, electric motors, compressors, drive shafts and process equipment. In all these cases, the seal retains the lubricant inside the assembly and prevents the ingress of dust, water or particles that could damage the bearings or gears. It is also used in equipment where there is a pressure difference between the inside and the outside, or where the shaft rotates at moderate and high speeds.

To select the seal correctly, verify that the shaft, housing and height dimensions match those of your equipment's housing and shaft. The Mz design is suitable for shafts with a fine surface finish and sufficient surface hardness; if the shaft shows wear, consider a wear sleeve or a seal with an auxiliary lip. During mounting, lubricate the lip with the same oil used in the equipment, insert the seal perpendicularly and avoid striking the lip. If the housing has burrs, clean it before mounting.

If you need an equivalent seal or a nearby size, you can send us the 5794 code or the dimensions of your shaft and housing. We can also look for alternatives in other brands or configurations if this design does not suit your application. We have more than 80 years of experience in the field. Write to us on WhatsApp and we will advise you.

To request a quote for the DBH 5794 seal or ask about other sizes, send the code 5794 by WhatsApp to MR Accesorios Industriales. We will reply with the alternatives that best suit your equipment. You can also ask about seals from other brands or seal kits for maintenance. We are in Buenos Aires, Argentina, and since 1945 we have supported industry with products and technical advice.