Radial shaft seal DBH 5708 — 58.00 x 80.00 x 13.00

DBH 5708 is a radial shaft seal reference, within Seals. Request a quote for 5708 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 5708 oil seal is a single-lip radial shaft seal with an Lz design, intended for rotating shafts where lubricant must be contained and dust, water or particles kept out. Its dimensions are 58.00 mm shaft diameter, 80.00 mm housing bore and 13.00 mm height. It is used in gearboxes, pumps, electric motors and power transmission equipment running with oil or grease. MR Accesorios Industriales sells it as part of its seal line.

The DBH 5708 is a lip-type radial shaft seal, identified by the designation 5708. The dimensions shown on its product page are 58.00 mm shaft diameter (d), 80.00 mm housing bore (D) and 13.00 mm height (h). The Lz design corresponds to a single sealing lip with spring, suitable for rotating shafts with permanent lubrication. The 13 mm height allows it to be mounted in housings where axial space is limited, without sacrificing seating surface on the outer diameter.

This type of oil seal is used in equipment where a shaft passes through a lubricant-filled housing: gearboxes, centrifugal pumps, electric motors, conveyor rollers and belt or chain drives. It also appears in applications exposed to dust or water, where the lip must keep oil in and contaminants out. In all these cases, selection is defined by the shaft and housing dimensions, not by the equipment brand.

For correct installation, check that the shaft has the proper hardness and surface finish and shows no burrs or wear marks on the sealing track. The housing must be clean, free of dents and with the diameter and depth corresponding to the 80.00 x 13.00 mm size. Lubricate the lip before inserting it and fit the seal perpendicular to the shaft, using a tool that presses on the outer diameter and not on the lip. If the shaft is scored, consider a wear sleeve or an oil seal with an offset lip.

If you need a nearby size or an equivalent, send us the 5708 part number or the dimensions 58.00 x 80.00 x 13.00 mm and the type of application. With that data we look for alternatives within the DBH line or other brands we carry, always respecting shaft diameter, housing bore and height. We can also advise you if the original seal has a different lip geometry or if the housing accepts a different height.

MR Accesorios Industriales carries the DBH brand as part of its seals and oil seals catalogue. If you already have the 5708 part number at hand, send it by WhatsApp together with a photo of the old seal or of the cover where it is mounted. That way we confirm the size and send you the quote without delay.