Radial shaft seal DBH 5675 — 25.40 x 46.43 x 15.87

DBH 5675 is a radial shaft seal reference, within Seals. Request a quote for 5675 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 5675 radial shaft seal is a lip seal mounted in a machine housing to retain lubricant and prevent contaminants from entering. With dimensions of 25.40 mm shaft, 46.43 mm housing and 15.87 mm height, and an Lx design, it is used in equipment with rotating movement and a need for reliable sealing. MR Accesorios Industriales carries this brand and helps you confirm the exact size before requesting a quote.

This item is a radial shaft seal from the DBH line, identified by the code 5675. Its dimensions are 25.40 mm shaft diameter, 46.43 mm housing diameter and 15.87 mm height. The Lx design corresponds to a single-lip configuration with a spring, suitable for rotating shafts. The seal is press fitted into the housing and its flexible lip works on the shaft to contain the oil or grease. It is a wear part that should be replaced when lubricant loss or dirt ingress appears.

Typical applications for this type of seal include gearboxes, pumps, electric motors, rollers and transmission equipment. It is generally found in machines where a shaft rotates inside a housing and the lubricant needs to be separated from the environment. It is also used in older or imported equipment where the inch size or its metric equivalent is not standard. If your equipment loses oil around the shaft area, this seal may be the replacement.

To select a seal properly, check that the shaft diameter, housing diameter and height match those of the original part. The shaft surface must be clean, free of burrs and without excessive wear, and the housing must have the proper chamfer so the lip is not damaged during installation. Lubricate the lip before installing and make sure the spring ends up on the side of the fluid to be retained. If the shaft has a deep groove, consider an alternative size or a wear sleeve.

If you need an equivalent seal or a nearby size, the most practical thing is to send us the code 5675 or the current dimensions of your equipment. We can compare with other options from the same brand or compatible lines, always confirming against the manufacturer's data sheet. We can also advise you if the housing has a slightly different diameter or if the available height is smaller. The idea is that you do not buy blindly: first we verify that the part matches your machine.

To request a quote for the DBH 5675 oil seal or ask about an alternative, send us the code via WhatsApp to MR Accesorios Industriales. With more than 80 years in the business, we advise you so you get the right part. If you have doubts about the size, send us a photo of the old seal and the shaft and housing dimensions: that way we can confirm whether this model is the one you need.