Radial shaft seal DBH 5673 — 25.00 x 32.00 x 10.00

DBH 5673 is a radial shaft seal reference, within Seals. Request a quote for 5673 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 5673 oil seal is a radial shaft seal with a 25 mm shaft diameter, 32 mm housing diameter and 10 mm height, with an Mt design. It is used to retain lubricant and exclude contaminants on rotating shafts, in assemblies where axial space is limited. It is a wear part: when the shaft raceway or the lip becomes marked, it should be replaced to prevent leaks and lubricant loss. MR Accesorios Industriales carries this brand and advises you on choosing the correct seal.

This item is a DBH radial shaft seal, identified by the code 5673. Its dimensions are 25.00 mm shaft diameter (d), 32.00 mm housing diameter (D) and 10.00 mm height (h). The Mt design corresponds to a configuration with a sealing lip and metal body, suitable for press fitting into a cylindrical housing. The designation 5673 is the reference you will find on the manufacturer's data sheet and the one you should quote when asking for an equivalent.

Typical applications for a seal of this size include small gearboxes, pumps, electric motors, transmission shafts and process equipment where the goal is to contain oil or grease and stop dust or water from entering. It is also used in machine tools, washing and conveying equipment. In all cases, the seal works on a rotating shaft or one with relative movement and requires a sealing surface in good condition.

To install it, check that the housing is clean, free of burrs and has the correct diameter; lubricate the lip before inserting it and avoid striking the seal. The shaft must have suitable hardness and roughness; if there is wear, a repair sleeve can solve it. When selecting a replacement, in addition to the dimensions, take into account the type of fluid, the working temperature and the peripheral speed. If space allows, a seal with an auxiliary lip improves protection.

If you need a nearby size or an equivalent from another brand, send us the code 5673 and the housing and shaft dimensions. With that data we can look for an alternative with the same dimensions or suggest a seal with equivalent characteristics. We can also advise you if the Mt design does not suit your application and another lip geometry or material should be considered.

To request a quote for the DBH 5673 oil seal or ask about a similar size, write to us on WhatsApp and mention the code 5673. MR Accesorios Industriales carries this brand and can advise you on the most suitable option for your equipment. Remember that the final selection depends on the service conditions, so the more data you give us, the better the answer will be.