Radial shaft seal DBH 5654Vit — 70.00 x 85.00 x 8.00

DBH 5654Vit is a radial shaft seal reference, within Seals. Request a quote for 5654Vit via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 5654Vit radial shaft seal is a lip seal designed to prevent oil or grease leaks and the entry of contaminants in equipment with rotating shafts. Its dimensions of 70 mm shaft diameter, 85 mm housing and 8 mm height make it suitable for assemblies requiring a compact and reliable closure. It is a wear part that should be replaced at signs of leakage or noise, and at MR Accesorios Industriales you can request a quote on WhatsApp.

This DBH 5654Vit seal has an Mz design and is identified by its full designation: 70 mm shaft, 85 mm housing and 8.00 mm height. The sealing lip, made of elastomer, works on the rotating shaft to retain lubricant and block dust. The outer metal case ensures a firm fit in the housing. It is a standard part within the DBH radial shaft seal line, an official brand that MR sells.

It is used in gearboxes, pumps, electric motors, transmission shafts and industrial equipment in general where there is a rotating shaft that must be sealed. It also appears in automotive and agricultural machinery applications. Its 70x85x8 mm size covers a common range in medium-power equipment. If the seal loses oil, hardens or shows lip wear, it is time to replace it to avoid greater damage to bearings and gears.

To install it, check that the shaft has no burrs or marks and that the sealing surface is clean and lubricated. The housing must be free of residue and have the proper depth so that the seal sits flush or slightly recessed. When tapping, use a tube or shim that presses only on the metal case, never on the lip. Poor installation causes premature leaks. If the shaft shows wear, consider a repair sleeve or an alternative size.

If you need an equivalent seal or a nearby size, send us the part number engraved on the old part, the shaft, housing and height dimensions, and a photo if possible. With that data we look for the option available in our seals line. We can also advise you if the Mz design is not the right one for your application. The idea is that you do not end up with equipment stopped because of a wear part.

At MR Accesorios Industriales we work with seals and radial shaft seals for different applications. If this DBH 5654Vit is the one you need, send the part number on WhatsApp and we will send you the quote. If you are unsure about the size, ask us and we will help you confirm it before ordering.