Radial shaft seal DBH 5615Sil — 28.60 x 36.40 x 5.15

DBH 5615Sil is a radial shaft seal reference, within Seals. Request a quote for 5615Sil via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 5615Sil radial shaft seal is a lip seal that prevents oil or grease leaks and blocks dust and water from entering rotating shafts. With dimensions of 28.6 mm shaft, 36.4 mm housing and 5.15 mm height, and Mt design, it is press-fitted into crankcases, covers and gearboxes. It is a wear part: choosing the right compound and installation extends the life of the bearing and the equipment. MR Accesorios Industriales supplies it as an official brand.

This item is a radial shaft seal from the DBH line, identified as 5615Sil. Its dimensions are 28.6 mm shaft diameter (d), 36.4 mm housing diameter (D) and 5.15 mm height (h). The Mt design corresponds to a single-lip configuration with a spring, designed to retain lubricant in one direction and exclude contaminants from the environment. The lip runs on the shaft with slight interference; the outer body rests in the housing. Always confirm these dimensions against the manufacturer's data sheet before ordering.

Typical applications for a seal of this size include small electric motors, centrifugal pumps, gear reducers and gearboxes, compressors, and drive shafts in agricultural or industrial machinery. It is also used in washing equipment and processes with splashing, where the seal must contain lubrication and block water. In all cases, it is advisable to verify the permissible peripheral speed and working temperature according to the lip material, data that should be checked with the manufacturer.

To install a radial shaft seal, clean the housing and shaft, verify there are no burrs or marks that could damage the lip, and lubricate the seal before inserting it. The seal must enter perpendicular, without direct blows on the lip; use a tube or press that presses on the outer diameter. If the shaft shows wear, consider a repair sleeve or a nearby size. Selection depends on the fluid, temperature and speed; with that data the appropriate compound is determined.

If you need an equivalent or a size close to 5615Sil, send us the code, the shaft, housing and height dimensions, and a photo of the old seal. With that we search for alternatives in the same series or in compatible lines, respecting the Mt design and the available space. We can also advise you if the housing accepts a seal of a different height. The more complete the information, the faster the response.

To request a quote for the DBH 5615Sil seal or inquire about a nearby size, write to us on WhatsApp at MR Accesorios Industriales with the code and dimensions. We will respond with the alternatives that best fit your equipment. MR supplies this brand as part of its line of seals and oil seals.