Radial shaft seal DBH 5614 — 22.22 x 36.40 x 6.35

DBH 5614 is a radial shaft seal reference, within Seals. Request a quote for 5614 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 5614 radial shaft seal is a lip seal that closes off the passage of oil and grease between a rotating shaft and its housing. With dimensions of 22.22 mm shaft, 36.40 mm housing and 6.35 mm height, and Mt design, it is used in gearboxes, pumps, electric motors and transmission equipment to retain lubricant and stop the ingress of dust or water. MR Accesorios Industriales carries this official brand and advises you on choosing the right seal.

This item is a seal from the DBH line, identified with part number 5614. Its dimensions are 22.22 mm shaft diameter (d), 36.40 mm housing diameter (D) and 6.35 mm height (h). The Mt design corresponds to a seal with a sealing lip and metal case, designed to be press-fitted into the housing with the lip resting on the shaft. It is a radial sealing component that works with relative movement between shaft and housing.

Typical applications for a seal of these dimensions appear in equipment with small-section shafts: electric motors, centrifugal pumps, gearboxes, reducers, compressors and machine tools. It is also found in agricultural implements and conveyors. In all cases it performs the same function: keeping lubricant inside the assembly and preventing contaminants from entering that would accelerate wear on bearings and gears.

To select and install a seal, you must verify that the shaft and housing diameters match the values on the data sheet, that the height is compatible with the depth of the cavity, and that the lip is oriented toward the side of the fluid to be retained. The shaft must be clean, free of burrs and marks, and it is advisable to lubricate the lip before inserting it. A crooked installation or a scratched shaft causes leaks even if the seal is new.

If you need an equivalent or an adjacent size, the most practical approach is to send us part number 5614 along with the dimensions measured on the equipment: shaft diameter, housing diameter and height. With that data we can look for an alternative within the same brand or another line we carry. A photo of the old seal and the housing also helps to confirm the design and the lip direction.

At MR Accesorios Industriales we have worked with seals and oil seals for more than 80 years, and this DBH 5614 is part of the official brands we carry. If you want to request a quote, send us the part number on WhatsApp and we will reply with the information you need to move forward with your order.