Skip to content
All products
DBH type Lx radial shaft seal, double lip with one spring, in section · DBH 5588Pol
DBH 5588Pol radial shaft seal — 45 x 60 x 10

DBHBrand we market

DBH 5588Pol radial shaft seal — 45 x 60 x 10

Manufacturer Part Number5588PolOther seals 45 x 60 x 10 mm →
Brand
DBH
Category
Seals
Seal material
polyacrylate
Request a quote for 5588Pol via WhatsApp

We respond promptly.

Since 1945 · Martínez, Buenos Aires, Argentina

Request your quote via WhatsApp or email, with the quantity you need.

Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.

Ask via WhatsAppAsk via email

Description

DBH 5588Pol is a reference of radial shaft seal, within Seals. Request a quote for 5588Pol via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 5588Pol radial shaft seal is a lip seal mounted between a rotating shaft and a fixed housing to retain lubricant and exclude contaminants. Its dimensions are 45.00 mm shaft diameter, 60.00 mm housing diameter and 10.00 mm height, with design Lx. It is used in gearboxes, pumps, electric motors and transmission equipment where bearings must be protected and oil or grease leaks prevented.

This DBH 5588Pol seal has a shaft diameter of 45.00 mm, a housing diameter of 60.00 mm and a height of 10.00 mm. Design Lx corresponds to a single lip seal with spring, intended for rotating lubricated shafts. The DBH brand is a brand MR sells, so the replacement part is identified by its exact part number to avoid confusion with similar series.

Typical applications for a seal of these dimensions include gearboxes, centrifugal pumps, electric motors, spindles and power transmission equipment. In all cases it performs two functions: retaining lubricant inside the assembly and blocking the ingress of dust, water or particles that accelerate wear on bearings and bushings.

To install it, verify that the shaft has the appropriate hardness and surface finish, with no burrs or marks that could damage the lip. Lubricate the lip before inserting it and place the seal perpendicular to the shaft, with the lip facing the lubricant side. If the housing shows play or wear, consider a seal with a greater lip height.

If you need an equivalent or a different size, send us part number 5588Pol along with the shaft, housing and height dimensions. You can also send a photo of the old seal or the assembly drawing. At MR Accesorios Industriales we cross-check the data against the manufacturer's product page to offer you the best-fitting option.

If you have any questions about compatibility or installation, write to us on WhatsApp and send us part number 5588Pol. We will reply with the product's technical information.

Dimensions

Shaft (d)
45mm
Housing bore (D)
60mm
Height (h)
10.00mm
Design
Lx

Frequently Asked Questions

How do I request an equivalent?
Send part number 5588Pol and the shaft, housing and height dimensions via WhatsApp. With that data we search the DBH line for the option that best fits your equipment.
What does design Lx mean on this seal?
Design Lx corresponds to a single lip seal with spring, for rotating lubricated shafts. It is a common configuration in gearboxes and pumps.
What are the dimensions of the DBH 5588Pol seal?
It has a 45.00 mm shaft diameter, a 60.00 mm housing diameter and a 10.00 mm height. These are the dimensions shown in the designation and should be verified against the housing before mounting.
Request a quote for 5588Pol via WhatsApp
Request a quote on WhatsApp