Radial shaft seal DBH 5568 — 105.00 x 130.00 x 13.00/15.00

DBH 5568 is a radial shaft seal reference, within Seals. Request a quote for 5568 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 5568 radial shaft seal is a lip seal designed for rotating shafts. Its function is to retain lubricant inside the housing and block the entry of dust, water or particles that could damage bearings and gears. With dimensions of 105 mm shaft, 130 mm housing and a height of 13.00/15.00 mm, it is press-fitted into housings and covers. It is a wear part that should be replaced at every teardown to prevent leaks and contamination.

This item is a radial shaft seal from the DBH brand, identified with the code 5568. Its dimensions are 105 mm shaft diameter (d), 130 mm housing diameter (D) and a height (h) of 13.00/15.00 mm. The Lx design indicates a configuration with a sealing lip and a spring that ensures continuous contact on the shaft. It is made of elastomer resistant to oils and greases, with a metal case that gives it rigidity for press fitting. It is a key part for containing lubricant and protecting internal components.

Typical applications of this seal include gearboxes, pumps, electric motors, drive shafts and process equipment. In general, it is used in assemblies where a rotating shaft passes through a housing and oil losses or the entry of contaminants must be prevented. Due to its size, it is common in medium to large industrial machinery, such as mills, mixers, conveyors and pumping equipment. It is also found in the automotive sector and in agricultural implements.

To correctly select a seal, you must verify the shaft and housing dimensions, the type of lubricant, the working temperature and the peripheral speed. The Lx design is suitable for shafts rotating in a single direction and requires a polished shaft surface free of burrs. During installation, it is advisable to lubricate the lip, use an insertion tool that does not damage the seal and ensure that the seal is perpendicular to the shaft. If the housing shows wear, it may need to be repaired or a seal with a larger outer diameter may be used.

If you need a seal equivalent to the 5568 or a nearby size, the most practical thing is to send us the code or the current dimensions. At MR Accesorios Industriales we can look for alternatives in other brands or series, always respecting the shaft, housing and height dimensions. We can also advise you on the type of lip and material according to the fluid and temperature of your equipment. We have more than 80 years of experience in the field to help you find the right part.

To request a quote for the DBH 5568 seal or to ask about a similar size, send us a message by WhatsApp with the code or the dimensions. At MR Accesorios Industriales we will reply with the options that best suit your needs.