Radial shaft seal DBH 5563 — 36.00 x 48.00 x 10.00

DBH 5563 is a radial shaft seal reference, within Seals. Request a quote for 5563 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 5563 radial shaft seal is a lip seal that mounts on the shaft and seals against the housing to retain lubricant and block the entry of dust, water or particles. With dimensions of 36 mm shaft, 48 mm housing and 10 mm height, and Lz design, it is a common replacement part in rotating equipment. MR Accesorios Industriales sells it as an official brand and quotes it on WhatsApp.

This item is a radial shaft seal from the DBH line, identified with part number 5563. Its dimensions are 36 mm shaft diameter (d), 48 mm housing diameter (D) and 10 mm height (h). The Lz design corresponds to a single lip configuration with spring, intended for rotating shafts with lubrication. The elastomeric lip bears on the shaft and the outer body is press-fitted into the bore, creating the seal. It is a wear part that is replaced when lubricant leakage or contaminant ingress appears.

It is used in gearboxes, pumps, electric motors, transmission shafts and process equipment where a shaft rotates inside a housing and the oil needs to be separated from the environment. It also appears in applications with water or dust splash, where the seal protects bearings and gears. Due to its compact size, it is common in low and medium power equipment. If the seal fails, lubricant escapes and contaminants enter, which accelerates bearing wear and can cause unplanned downtime.

To install it, check that the shaft has no burrs or marks that could damage the lip, lubricate the lip with the same oil or grease used in the equipment and seat the seal perpendicular to the shaft. The Lz design works with the lip facing the lubricant side. When selecting a replacement, confirm the three dimensions and the lip type: a seal with the same dimensions but a different design may not seal the same way. If the shaft shows wear, consider a repair sleeve or a nearby size. Cleaning the housing and using a suitable installation tool prevent deformation.

If you need an equivalent or a nearby size, send us part number 5563 or the dimensions 36 x 48 x 10 mm on WhatsApp. At MR Accesorios Industriales we can look for alternatives within the DBH line or from other brands we carry, always confirming the technical data sheet before quoting. We can also guide you if the original seal has no visible brand or if the shaft has a different dimension. The idea is for you to receive the correct part without hassle.

MR Accesorios Industriales sells the DBH brand as an official brand. If you have questions about installation or want to confirm that this seal is the one for your equipment, write to us on WhatsApp with part number 5563 and we will reply with the available technical information.