Radial shaft seal DBH 5385Sil — 85.00 x 105.00 x 13.00

DBH 5385Sil is a radial shaft seal reference, within Seals. Request a quote for 5385Sil via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 5385Sil oil seal is a radial seal with 85.00 mm shaft diameter, 105.00 mm housing diameter and 13.00 mm height, Lx design. It is used to contain lubricant and stop the entry of dust, water or particles in gearboxes, pumps, motors and transmission equipment. Its elastomeric lip works on the rotating shaft and its metal case fits by pressure into the housing. It is a wear part: when oil loss appears or dirt enters, it should be replaced.

This item is a DBH radial shaft seal with the designation 5385Sil, with the dimensions listed on its product page: 85.00 mm shaft diameter (d), 105.00 mm housing diameter (D) and 13.00 mm height (h). The Lx design corresponds to the lip and case configuration that DBH identifies with that code. It is a single lip seal, intended for rotating shafts with lubrication, not for linear motion or high pressures. DBH is an official brand that MR carries.

Typical applications for a seal of this size are gearboxes, reducers, centrifugal pumps, electric motors, rollers and power transmission equipment. In all those cases it performs two functions: retaining oil or grease inside the assembly and preventing contaminants from entering from outside. It is also found in old or imported machines where the 85x105x13 mm size is the one corresponding to the original housing.

To install it, verify that the shaft has no burrs, scratches or wear in the lip contact area, and that the housing is clean and free of dents. Lubricate the lip before inserting it and place the seal properly perpendicular, without deforming it. If the shaft shows a marked groove, it is sometimes advisable to shift the seal a few millimeters or use a design with an auxiliary lip. Selection depends on lubricant type, temperature and rotation speed.

If you need an equivalent or a nearby size, send us the code 5385Sil or the dimensions 85x105x13 mm and the Lx design. It also helps to send a photo of the old seal, the shaft and housing diameters measured with a caliper, and the type of equipment where it goes. With that data we look for alternatives in other brands or series within our seals and oil seals catalog.

MR Accesorios Industriales has more than 80 years in the industry and carries oil seals, bearings, housings, power transmission, bushings, mounting tools and lubricants. If you want to request a quote for this DBH 5385Sil oil seal or ask about a similar size, write to us on WhatsApp with the code and we will reply.