Radial shaft seal DBH 5367 — 45.00 x 80.00 x 13.00

DBH 5367 is a radial shaft seal reference, within Seals. Request a quote for 5367 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 5367 radial shaft seal is a lip seal mounted in a machine housing to retain lubricant and prevent the entry of dust, water or particles. With a 45 mm shaft diameter, 80 mm housing and 13 mm height, and Lx design, it is a common replacement part in gearboxes, pumps and transmission equipment. MR Accesorios Industriales sells this brand and advises you so you choose the right oil seal for your application.

This item is a DBH 5367 radial shaft seal, identified by its designation 5367. Its dimensions are 45.00 mm shaft diameter (d), 80.00 mm housing diameter (D) and 13.00 mm height (h). The Lx design corresponds to a single-lip seal with spring, intended for rotating shafts with lubrication. DBH is a brand that MR sells, so code 5367 is available as a standard replacement within the line of radial shaft seals and oil seals.

Typical applications for a seal of these dimensions include gearboxes, reducers, centrifugal pumps, electric motors, transmission shafts and process equipment. In all cases it serves to confine the oil or grease inside the assembly and block the entry of contaminants from outside. It is a critical maintenance part: when the lip wears or hardens, lubricant loss appears and it should be replaced before it damages the bearing or the shaft.

To install a radial shaft seal, check that the shaft diameter and the housing diameter match the values on the product page, that the shaft has no burrs or splines in the sealing area and that the contact surface is clean and lubricated. The Lx design is installed with the lip facing the side of the fluid to be retained. If the equipment runs at high peripheral speed or elevated temperature, it is advisable to check the lip material and the spring type before replacing it with an equivalent size.

If you cannot find code 5367 or need a nearby size, send us the shaft diameter, the housing diameter and the height you measured, together with a photo of the old seal if possible. With that data we look for the equivalent within the DBH line or other brands we sell. We can also guide you if the housing has a shoulder or if the original seal has a special geometry that should be respected.

To request a quote for the DBH 5367 oil seal or ask for an alternative, message us on WhatsApp with code 5367 and the dimensions 45 x 80 x 13 mm. At MR Accesorios Industriales we handle technical enquiries on sealing and oil seals, and we help you confirm that the part is the right one for your equipment before you order it.