Radial shaft seal DBH 5365Sil — 60.00 x 82.00 x 8.00

DBH 5365Sil is a radial shaft seal reference, within Seals. Request a quote for 5365Sil via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 5365Sil radial shaft seal is a lip seal that mounts in the housing and seals against the rotating shaft to retain lubricant and block the entry of dust, water or particles. With 60 mm shaft diameter, 82 mm housing and 8 mm height, and Lx design, it is a common replacement part in gearboxes, pumps and transmission equipment. MR Accesorios Industriales supplies this brand and helps you confirm the size before requesting a quote.

This item is a seal from the DBH line, identified by code 5365Sil. Its dimensions are 60 mm shaft diameter (d), 82 mm housing diameter (D) and 8.00 mm height (h). The Lx design indicates a single-lip configuration with spring, designed for rotating shafts with lubrication. The elastomer and the internal spring work together to maintain contact on the shaft and compensate for small misalignments.

Seals of this size are used in equipment where a shaft rotating inside a housing must be sealed: gearboxes, centrifugal pumps, electric motors, mixers, conveyor belts and agricultural machinery. They also appear in applications where the environment has dust or moisture and the aim is to protect the bearing or bushing behind the seal. It is a wear part: when it starts losing oil or dirt gets in, it should be replaced.

To install a seal, check the condition of the shaft and housing: no burrs, no deep marks and with the right roughness. The seal is pressed in with a press or a support tube, never by hitting the lip. Before fitting it, lubricate the lip with the same grease or oil used in the equipment. Check that the spring is on the side of the fluid to be retained and that the installation height matches that of the housing.

If you need a nearby size or an equivalent, send us code 5365Sil or the dimensions 60 x 82 x 8 mm and the design. With that data we search the DBH line and other brands we supply. If the shaft or housing is worn, we can evaluate alternatives with an additional lip or specific materials. The idea is that you do not have equipment stopped because of a seal.

To request a quote, send code 5365Sil by WhatsApp to MR Accesorios Industriales. If you have doubts about installation or want to confirm that this is the right size, attach a photo of the old seal or the dimensions taken with a calliper. That way we will reply with the option that best suits your equipment.