Radial shaft seal DBH 5238Sil — 54.00 x 68.00 x 10.50

DBH 5238Sil is a radial shaft seal reference, within Seals. Request a quote for 5238Sil via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 5238Sil radial shaft seal is a lip seal that mounts on rotating shafts to retain lubricant and block the entry of dust, water or particles. With dimensions of 54 mm shaft, 68 mm housing and 10.50 mm height, and an Lx design, it is a common replacement part in gearboxes, pumps and power transmission equipment. MR Accesorios Industriales carries this official brand and advises you so you choose the correct seal for your application.

This item is a DBH 5238Sil radial shaft seal, identified by its designation 5238Sil. Its dimensions are 54 mm shaft diameter (d), 68 mm housing diameter (D) and 10.50 mm height (h). The Lx design corresponds to a single-lip seal with spring, intended for rotating shafts with lubrication. The DBH brand is an official brand that MR carries, so the product arrives with its corresponding identification and traceability. Always verify that all three dimensions match your equipment's housing and shaft before replacing.

Radial shaft seals of this size are used in equipment where a shaft rotates inside a housing and oil or grease must be retained. They appear in gearboxes, centrifugal pumps, electric motors, mixers, conveyors and agricultural or road machinery. They are also found in applications where the environment has dust or moisture and the bearings and gears need protection. If the seal works near an area with chips or abrasives, it is advisable to check the condition of the lip more frequently.

To install a radial shaft seal, the shaft must be clean, free of burrs or marks, and the housing free of remnants of the previous seal. Lubricate the lip with the same grease or oil used in the equipment before inserting it, and place the seal perpendicular to the shaft, without striking it unevenly. If the housing has a chamfer, use it to guide the part. When selecting, in addition to the dimensions, take into account the shaft speed, working temperature and type of fluid. The Lx design is a reference, but there may be material variants depending on the application.

If you need a seal equivalent to the 5238Sil or a nearby size, the most practical thing is to send us the complete code, the brand and the shaft, housing and height dimensions. With that data we can look for an alternative within the same brand or another that we carry. A photo of the old seal or the housing, showing the lips and the condition of the raceway, also helps. At MR Accesorios Industriales we work with seals and radial shaft seals from different lines, and we guide you so the part does not fail due to a minimal difference in dimensions.

To request a quote for the DBH 5238Sil seal or ask about a similar size, write to us on WhatsApp and send us the code. At MR Accesorios Industriales we handle technical inquiries and help you identify the correct part for your equipment. Remember that the designation 5238Sil and the dimensions 54 x 68 x 10.50 mm are the main reference to avoid errors. If you have doubts about installation or material, we can also advise you.