DBH 5111 radial shaft seal — 49.2 x 65.06 x 12.7

DBH 5111 is a reference of radial shaft seal, within Seals. Request a quote for 5111 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 5111 radial shaft seal is a lip seal designed to retain lubricant and exclude contaminants on rotating shafts. Its dimensions of 49.20 mm shaft diameter, 65.06 mm housing and 12.70 mm height make it suitable for equipment with shafts of approximately 49 mm. It is press-fitted into the housing and runs against the shaft, creating a dynamic barrier that protects bearings and mechanisms. It is a frequently replaced part in industrial maintenance.

This item is a radial shaft seal from the DBH brand, identified by code 5111. Its dimensions are: shaft diameter (d) 49.2 mm, housing diameter (D) 65.06 mm and height (h) 12.70 mm. The Mx design corresponds to a configuration with a single sealing lip and metal case, suitable for applications where axial space is limited. The lip, generally made of elastomer, presses against the shaft and keeps the lubricant inside the assembly. The outer case ensures a firm fit in the housing.

Radial shaft seals such as the DBH 5111 are used in gearboxes, pumps, electric motors, conveyor rollers and power transmission equipment. Their main function is to prevent oil or grease leaks and block the entry of dust, water or particles. In environments with chips or moisture, the sealing lip extends the service life of bearings and gears. They are also used in automotive applications and agricultural machinery.

To correctly select a seal, verify that the shaft and housing dimensions match those of the equipment. The shaft surface must be ground and free of grooves, with hardness and roughness suitable to avoid damaging the lip. During installation, lubricate the lip with the same grease or oil used in the system and use an installation tool that presses on the outer edge. Avoid striking the seal directly. If the shaft shows wear, consider a repair sleeve or an alternative size.

If you need a seal with an equivalent from another brand, give us code 5111 or the dimensions 49.20 x 65.06 x 12.70 mm. We can look for alternatives in our line of seals and oil seals, respecting the tolerances and the Mx design. We also offer technical advice to identify the part from the equipment data sheet or a physical sample. The DBH brand is a brand MR sells, with standard and special sizes.

To request a quote for the DBH 5111 oil seal, send us the code on WhatsApp to MR Accesorios Industriales. Our technical team replies with the information you need to move forward with your maintenance.