Product page
Radial shaft seal DBH 5065 — 38.00 x 62.00 x 10.00
- Manufacturer Part Number
- 5065
- Brand
- DBHOfficial brand
- Category
- Seals
- Subcategory
- Radial shaft seals
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
DBH 5065 is a radial shaft seal reference, within Seals. Request a quote for 5065 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
This DBH 5065 radial shaft seal is a lip seal that mounts in the housing and seals against the rotating shaft to retain lubricant and block the entry of dust, water or particles. Its dimensions of 38 mm shaft, 62 mm housing and 10 mm height place it in medium-sized transmission and rotating equipment. It is used in pumps, electric motors, gearboxes and rollers, among other industrial applications.
The DBH 5065 is a seal with an Lz design, featuring a sealing lip and a metal body. The listed dimensions are 38 mm shaft diameter, 62 mm housing diameter and 10 mm height. The Lz design defines the lip geometry and the type of case, so it is advisable to verify that the housing and shaft meet the tolerances and surface finish required by this type of seal.
It is used in equipment with rotating shafts where oil or grease must be contained and contaminants kept out: centrifugal pumps, electric motors, gear reducers, conveyor rollers, mixers and machine tools. It also appears in automotive and agricultural machinery applications. It is a wear part: over time the lip hardens or gets damaged and starts to leak, at which point it should be replaced.
To install it, clean the housing and shaft, check that there are no burrs or marks and lubricate the lip before inserting it. The seal must go in perpendicular, without direct blows on the lip, and sit fully seated in the housing. Check that the internal spring is in place and that the shaft is not worn in the contact area. If the shaft shows a deep groove, consider a nearby size or a repair sleeve.
If you need a different size or an equivalent, send us the code engraved on the seal, the shaft, housing and height dimensions, and a photo if possible. With that data we look for the option that best fits within the lines we carry. We can also advise you on the type of lip and material according to the fluid and working temperature.
MR Accesorios Industriales carries the DBH brand as an official brand. If you want to request a quote for this seal or ask about a similar size, send the code 5065 on WhatsApp and we will reply with the available information.
Dimensions
- Shaft (d)
- 38mm
- Housing bore (D)
- 62mm
- Height (h)
- 10.00mm
- Design
- Lz
Frequently Asked Questions
- What dimensions does the DBH 5065 seal have?
- According to the listing, the DBH 5065 has a 38 mm shaft diameter, a 62 mm housing diameter and a 10 mm height, with an Lz design. These are the dimensions used to identify the part and order the replacement.
- How do I know if this seal replaces the one I have installed?
- Compare the three dimensions: shaft diameter, housing diameter and height. If they match and the design is compatible, it is the same type of seal. If in doubt, send us a photo and the old code on WhatsApp.
- What should I keep in mind when installing a radial shaft seal?
- Clean the housing and shaft well, lubricate the lip, avoid hitting it and check that it is perpendicular. The shaft must not be worn in the contact area. If there is a marked groove, it is advisable to consider a nearby size or a sleeve.