Radial shaft seal DBH 5035Sil — 52.40 x 81.00 x 11.50

DBH 5035Sil is a radial shaft seal reference, within Seals. Request a quote for 5035Sil via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 5035Sil radial shaft seal is a lip seal that stops lubricant from escaping and blocks dust and moisture from entering at the point where a shaft rotates inside a housing. With dimensions of 52.40 mm shaft, 81.00 mm housing and 11.50 mm height, and Kx design, it is used in gearboxes, pumps, electric motors and transmission equipment that operate with oil or grease. MR Accesorios Industriales supplies it as part of its line of seals and radial shaft seals.

This item is a DBH 5035Sil radial shaft seal, identified by its designation 5035Sil. Its dimensions are 52.40 mm shaft diameter (d), 81.00 mm housing diameter (D) and 11.50 mm height (h). The Kx design defines the geometry of the lip and the outer body, intended to retain lubricant and exclude contaminants on rotating shafts. It is a precision component that works in direct contact with the shaft and with the housing bore, so its dimensions must match those of the original assembly or the manufacturer's data sheet.

Typical applications for a seal of this size and design include gearboxes, reducers, centrifugal pumps, electric motors, compressors and belt or chain transmission equipment. In every case it fulfills the function of sealing the passage of oil or grease to the outside and preventing particles, water or dust from entering that accelerate wear on bearings and gears. It is also used in machine tools, process equipment and hydraulic systems where a reliable barrier at the shaft is required.

To install a radial shaft seal correctly, check that the shaft has no burrs, scratches or excessive wear in the contact area, and that the housing is clean and free of deformation. Lubricate the lip with the same oil or grease used in the equipment before inserting it, and install the seal with a suitable tool that presses on the outer diameter, never on the lip. The selection of the Kx design and the dimensions 52.40 x 81.00 x 11.50 mm must respond to the speed, temperature and lubricant type conditions specified by the equipment manufacturer.

If you need an equivalent or a nearby size, send us the code 5035Sil or the dimensions 52.40 x 81.00 x 11.50 mm on WhatsApp. You can also send us a photo of the old seal, the designation stamped on the body or the data from the equipment nameplate. At MR Accesorios Industriales we compare that information against our database of seals and radial shaft seals to offer you the option that best fits your assembly, without compromising sealing or the service life of the assembly.

MR Accesorios Industriales supplies the DBH brand as part of its line of seals and radial shaft seals. If your equipment requires this DBH 5035Sil radial shaft seal, write to us on WhatsApp with the code or the dimensions and we will send you a quote. We can also advise you on installation and on selecting seals for other industrial applications.