Radial shaft seal DBH 1274Pol — 29.00 x 46.00 x 13.40

DBH 1274Pol is a radial shaft seal reference, within Seals. Request a quote for 1274Pol via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 1274Pol radial shaft seal is a lip seal that closes off the passage of oil or grease between a rotating shaft and its housing. With a 29 mm shaft, 46 mm housing and 13.40 mm height, and A 417 design, it is press-fitted into crankcases, covers and gearboxes. MR Accesorios Industriales carries this brand and helps you confirm the size before requesting a quote.

This item is a DBH radial shaft seal identified as 1274Pol, with the following dimensions: shaft diameter 29 mm, housing diameter 46 mm and height 13.40 mm. The A 417 design corresponds to a single-lip seal with a metal case and sealing lip, intended for rotating shafts. These are the dimensions you must verify against the housing and the shaft before ordering, because a seal with the same section but a different height will not seal the same way.

Radial shaft seals of this size are used in pumps, electric motors, gearboxes, speed reducers and power transmission equipment where a shaft rotates inside a housing containing lubricant. They also appear in agricultural machinery, washing equipment and conveying systems. The function is to retain the lubricant and, at the same time, prevent the entry of dust, water or particles that accelerate wear of the bearing or bushing.

To install it, clean the housing and the shaft, check that there are no burrs or marks, and lubricate the lip before inserting it. The seal is positioned with the lip facing the lubricant side and is pressed in with a tube of the appropriate diameter, never by striking the lip. If the shaft shows wear, consider a nearby size or a seal with an auxiliary lip. The selection depends on speed, temperature and the type of fluid, data you should have on hand when requesting a quote.

If you need an equivalent or a nearby size, send us the 1274Pol code or the dimensions 29 x 46 x 13.40 mm on WhatsApp. At MR Accesorios Industriales we compare the A 417 design against the available alternatives and confirm whether there is a compatible option. We can also search by shaft and housing dimensions if the original code does not appear in the catalogue.

To move forward with the quote, send us the DBH 1274Pol code or the dimensions of the seal you are replacing. The more data you give us — type of equipment, fluid and working conditions — the more accurate the proposal will be. Write to us on WhatsApp and we will reply with the options we have for that size.