Radial shaft seal DBH 1273Vit — 95.00 x 115.00 x 9.50/14.50

DBH 1273Vit is a radial shaft seal reference, within Seals. Request a quote for 1273Vit via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 1273Vit oil seal is a single-lip radial shaft seal with an A 109-R AH design, intended for rotating shafts of 95 mm diameter and housings of 115 mm. Its height of 9.50/14.50 mm combines a mounting section with an auxiliary lip that improves sealing in dusty or dirty environments. It is used in gearboxes, pumps, electric motors and power transmission equipment to retain lubricant and stop contaminants from entering.

This DBH 1273Vit oil seal has a shaft diameter of 95 mm, a housing diameter of 115 mm and a height of 9.50/14.50 mm. The A 109-R AH design corresponds to a radial shaft seal with a main sealing lip and an auxiliary exclusion lip, mounted on a metal outer ring. The 1273Vit designation identifies the size and construction type within the DBH line. It is a replacement component for equipment that already has that cavity and that shaft defined.

Typical applications for this oil seal include gearboxes, speed reducers, centrifugal pumps, electric motors and conveyor rollers. In all cases it works against a rotating shaft and a fixed housing, retaining oil or grease and preventing the entry of dust, water or particles. It is also found in power transmission equipment where peripheral speed is moderate and lubrication is permanent.

For installation, check that the shaft has the hardness and surface finish suitable for a seal lip, and that the housing is clean and free of burrs. Lubricate the lip before inserting it and install the seal with a support tube that presses on the outer ring, never on the lip. The 9.50/14.50 mm height indicates that the seal has an auxiliary lip that must face the dirty side. If the shaft shows wear, consider a repair sleeve.

If you need an equivalent or a nearby size, send us the 1273Vit code or the dimensions of your shaft and housing. We can look for alternatives within the DBH line or from other brands we carry, always respecting the mounting geometry. We can also advise you if the original seal has a different design and the cavity needs to be adapted. At MR Accesorios Industriales we work with seals and oil seals for replacement and manufacturing.

To request a quote for the DBH 1273Vit oil seal, write to us on WhatsApp with the code and the quantity you need. If you have doubts about the size, send a photo of the old seal or the shaft and housing dimensions. We will reply with the alternatives that best fit your equipment.