DBH 1265Pol radial shaft seal — 45 x 65 x 9/13

DBH 1265Pol is a reference of radial shaft seal, within Seals. Request a quote for 1265Pol via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 1265Pol radial shaft seal is a lip seal that mounts in the housing and seals against the rotating shaft to retain lubricant and block the entry of dust, water or particles. Its A 109-Bidi design works in both directions, so it is suitable for shafts rotating in one direction as well as applications with reversing rotation. It is used in gearboxes, pumps, electric motors and power transmission equipment.

This item is a DBH 1265Pol radial shaft seal with the following dimensions: shaft diameter 45 mm, housing diameter 65 mm and height 9.00/13.00 mm. The A 109-Bidi design indicates a double-lip configuration, suitable for retaining lubricant while also stopping contaminants from entering from the outside. The double height (9/13 mm) corresponds to a profile with a reinforced section that seats in the machined bore of the housing.

Typical applications for this seal include gearboxes, speed reducers, centrifugal pumps, electric motors, conveyor rollers and belt or chain drive equipment. In all cases it performs the function of dynamic sealing between the shaft and the housing, preventing oil or grease leaks and protecting bearings and gears from premature wear due to external contamination.

For installation, check that the shaft and housing diameters match the indicated dimensions, that the shaft surface is polished and free of burrs, and that the housing has the proper entry chamfer. Lubricate the lip before inserting it and install the seal with a pressing tool that bears on the outer edge, never on the lip. If the shaft shows wear, consider a repair sleeve.

If you need an equivalent or a different size, send us the original part number, the shaft, housing and height dimensions, and the type of application. With that data we can look for an alternative within the DBH line or other brands we carry. We can also advise you on the most suitable lip design according to speed, temperature and the fluid to be retained.

To request a quote for the DBH 1265Pol seal, send us the part number on WhatsApp at MR Accesorios Industriales. We will reply with the quote and the alternatives that best fit your equipment.