Radial shaft seal DBH 1251Vit — 39.00 x 50.00 x 7.00

DBH 1251Vit is a radial shaft seal reference, within Seals. Request a quote for 1251Vit via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 1251Vit radial shaft seal is a lip seal that prevents oil or grease leaks and blocks dust and water ingress on rotating shafts. With dimensions of 39 mm shaft diameter, 50 mm housing diameter and 7 mm height, and Lx-R H design, it is press-fitted into crankcases, covers and gearboxes. It is a wear part that should be replaced when lubricant loss or lip play appears. MR Accesorios Industriales sells it as an official brand.

This item is a DBH 1251Vit radial shaft seal, identified by its 1251Vit designation. Its dimensions are 39 mm shaft diameter (d), 50 mm housing diameter (D) and 7.00 mm height (h). The Lx-R H design indicates a configuration with a sealing lip and reinforced body, suitable for retaining lubricant in one direction and withstanding continuous shaft friction. DBH is an official brand that MR carries, so the replacement part keeps the geometry and material intended for this application.

Typical applications for a seal of these dimensions appear in gearboxes, pumps, electric motors, transmission shafts and process equipment. It is also used in agricultural machinery, transport and industrial plants where rotating shafts must be isolated from the environment. As a wear part, its service life depends on speed, temperature and lubricant cleanliness. If the seal leaks, oil migrates to unwanted areas and can carry contaminants into the mechanism.

To install a radial shaft seal, check that the shaft has no burrs or deep marks and that the housing is clean and free of deformation. Lubricate the lip with the same oil or grease used in the equipment before inserting it, and place the seal perpendicular to the shaft with a support tube that presses on the outer edge, never on the lip. If the shaft shows wear, consider a nearby size or a repair sleeve. Selection must take peripheral speed and lubricant type into account; if in doubt, consult us with the equipment data.

If you need an equivalent seal or a close size, send us the code 1251Vit or the dimensions 39 x 50 x 7 mm via WhatsApp. You can also send a photo of the old seal, the shaft and housing diameters, and the lubricant type. With that data we verify the exact size or a compatible alternative within the DBH line. MR Accesorios Industriales carries this brand as part of its seals and oil seals catalog.

To complete your inquiry, write to us on WhatsApp and send the code 1251Vit along with the dimensions or a photo of the part. That way we quickly confirm whether it is the reference you need or whether a variant applies. We work with radial shaft seals in different brands and sizes so you can solve the replacement without stopping the equipment.