Radial shaft seal DBH 1202Pol — 15.00 x 27.00 x 6.00

DBH 1202Pol is a radial shaft seal reference, within Seals. Request a quote for 1202Pol via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 1202Pol radial shaft seal is a lip seal designed to retain lubricant and prevent contaminants from entering rotating shafts. With dimensions of 15 mm shaft, 27 mm housing and 6 mm height, and an Mx design, it fits assemblies where axial space is limited. It is a wear part that should be replaced at the first sign of leakage. MR Accesorios Industriales supplies this official brand and advises you on choosing the correct seal.

This item is a DBH 1202Pol radial shaft seal, identified by its 1202Pol designation. Its attributes indicate a shaft diameter of 15 mm, a housing diameter of 27 mm and a height of 6.00 mm. The Mx design corresponds to a configuration with a sealing lip and metal body, intended for press fitting into a cylindrical housing. The 1202Pol nomenclature allows locating it within the DBH line and confirming its interchangeability with other references of the same dimensions.

Typical applications for a seal of these dimensions include small centrifugal pumps, low-power electric motors, gear reducers, gearboxes and transmission equipment. It is also used in machine tools, washing equipment and irrigation systems where there are rotating shafts that must remain lubricated and free of dust or water. In all cases, the seal works on a 15 mm shaft and a 27 mm housing, with a height of 6.00 mm that determines the available space.

For installation, verify that the shaft and housing are clean, free of burrs and marks. Lubricate the lip with the same oil or grease used in the equipment before inserting it. Place the seal perpendicular to the shaft and press evenly, without striking the lip. If the shaft shows wear, consider a neighboring size or a seal with an auxiliary lip. Selection depends on speed, temperature and lubricant type; if in doubt, consult us with your equipment data.

If you need an equivalent or a close size, send us the 1202Pol code or the dimensions 15 x 27 x 6 mm and the type of application. We can look for alternatives within the same DBH brand or other lines we distribute, always respecting the shaft, housing and height dimensions. We can also advise you if the housing has a special design or if the original seal is no longer available.

To request a quote for the DBH 1202Pol seal, write to us on WhatsApp at MR Accesorios Industriales with the code and the quantity you need. We will reply shortly with purchasing options. If you have questions about installation or want to confirm that this reference is the one for your equipment, send us a photo of the old seal or the measurements taken with a caliper.