Radial shaft seal DBH 1185Vit — 60.00 x 75.00 x 7.00

DBH 1185Vit is a radial shaft seal reference, within Seals. Request a quote for 1185Vit via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 1185Vit radial shaft seal is a lip seal that is mounted in the housing and seals against the rotating shaft to retain lubricant and block the entry of dust, water or particles. Its Lx-R H design combines a sealing lip with a spring that maintains contact pressure. It is used in gear reducer boxes, pumps, electric motors and transmission equipment where bearings and gears must be protected. MR Accesorios Industriales sells it as an official brand.

This item is a DBH 1185Vit radial shaft seal with the following dimensions: shaft diameter 60 mm, housing bore diameter 75 mm and height 7.00 mm. The Lx-R H design corresponds to a seal with a sealing lip and spring, intended for rotating shafts. The designation 1185Vit identifies the size and type within the DBH line. Before installing it, verify that the housing and shaft match these dimensions, because a seal of a different size will not seal correctly.

Typical applications for this seal include gearboxes, gear reducers, centrifugal pumps, electric motors and power transmission equipment. In all these cases, the seal prevents oil or grease leaks and protects the bearings from contaminant ingress. It is also used in machine tools, compressors and conveyor systems. If the equipment operates with high vibration or temperature, it is advisable to check the condition of the shaft and housing before replacing the seal.

To select and install a radial shaft seal, take into account the shaft diameter, housing bore diameter and height. The Lx-R H design indicates that it has a spring and lip, suitable for rotating shafts with lubrication. During installation, lubricate the lip, avoid impacts on it and make sure the shaft has no burrs or marks. If the shaft shows wear, it may be necessary to use a seal with an auxiliary lip or to repair the surface. Correct alignment between shaft and housing extends the life of the seal.

If you need an equivalent seal or a nearby size, send us the code 1185Vit or the dimensions 60 x 75 x 7 mm on WhatsApp. You can also indicate the type of equipment and the brand of the original seal. At MR Accesorios Industriales we help you find the right option within our line of seals and oil seals. Request a quote with no obligation and ask about other sizes in the same family.

To request a quote for the DBH 1185Vit seal, write to us on WhatsApp and send us the code or the dimensions. At MR Accesorios Industriales we handle technical inquiries and advise you so you choose the correct seal. Remember that we work with official brands and in-house manufacturing, and that we can guide you if you need a replacement for your application.