DBH 1183Vit radial shaft seal — 70 x 85 x 7
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
- Seal material
- Viton
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
DBH 1183Vit is a reference of radial shaft seal, within Seals. Request a quote for 1183Vit via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The DBH 1183Vit radial shaft seal is a lip seal that is mounted in the housing and closes against the shaft to retain oil or grease and block the entry of dust and water. Its Lx-R H design combines a sealing lip with a spring that maintains contact pressure. It is used in gearboxes, pumps, electric motors and transmission equipment that rotate at moderate speeds. MR Accesorios Industriales carries it as part of its line of industrial seals.
This DBH 1183Vit seal has a shaft diameter of 70 mm, a housing diameter of 85 mm and a height of 7.00 mm. The Lx-R H design indicates a configuration with a sealing lip and spring, suitable for rotating shafts with permanent lubrication. The 1183Vit designation identifies the geometry and material of the lip within the DBH line. It is a direct replacement component for equipment that requires reliable, low-friction sealing.
It is used in gearboxes, centrifugal pumps, electric motors, conveyor rollers and belt or chain transmission equipment. It also appears in machine tools, compressors and hydraulic systems where oil leaks and the entry of contaminants must be prevented. It is a wear part that should be replaced when leaks or bearing noise are detected.
To select it, verify that the shaft and housing dimensions match those of the original seal. The lip must be lubricated before installation and the shaft must not have burrs or wear. The 7.00 mm height defines the space available in the housing. If the equipment operates with high vibration or temperature, ask about variants with a more resistant material.
To quote an equivalent, send us the code 1183Vit or the shaft, housing and height dimensions. With that data we search the DBH line and other brands we carry. We can also advise you if the original seal has a special design or if the shaft is worn and an alternative solution is advisable.
To request a quote for the DBH 1183Vit seal, send the code on WhatsApp to MR Accesorios Industriales. We will confirm alternatives with no obligation. We work with seals for rotating shafts and can advise you on selection according to your equipment's conditions.
Dimensions
- Shaft (d)
- 70mm
- Housing bore (D)
- 85mm
- Height (h)
- 7.00mm
- Design
- Lx-R H
Frequently Asked Questions
- What are the dimensions of the DBH 1183Vit seal?
- The DBH 1183Vit seal has a 70 mm shaft diameter, an 85 mm housing diameter and a 7.00 mm height. These are the dimensions shown in the designation and they allow the replacement part to be identified. It is always advisable to verify against the original seal before installing.
- What applications is this seal suitable for?
- It is used in gearboxes, pumps, electric motors, rollers and transmission equipment. Its Lx-R H design with lip and spring seals against the shaft and prevents lubricant leaks. It is suitable for rotating shafts at moderate speeds with permanent lubrication.
- How do I request a quote or an equivalent?
- Write to us on WhatsApp at MR Accesorios Industriales with the code 1183Vit or the shaft, housing and height dimensions. With that data we will quote the DBH seal and look for alternatives. We can also advise you if the shaft is worn.