Product page
Radial shaft seal DBH 1152 — 37.00 x 76.00 x 9.50/13.50
- Manufacturer Part Number
- 1152
- Brand
- DBHOfficial brand
- Category
- Seals
- Subcategory
- Radial shaft seals
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
DBH 1152 is a radial shaft seal reference, within Seals. Request a quote for 1152 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The DBH 1152 radial shaft seal is a lip seal designed to stop lubricant from escaping and prevent contaminants from entering rotating equipment. It is installed in assemblies where the shaft rotates inside a fixed housing, such as gearboxes, pumps and electric motors. Its A 369 design and standardized dimensions make it suitable for direct replacements in industrial maintenance.
This DBH 1152 oil seal has a shaft diameter of 37 mm, a housing diameter of 76 mm and a height of 9.50/13.50 mm. The A 369 design corresponds to a single-lip seal with spring, intended to retain oil or grease in moderate-rotation applications. The stepped height allows a firm fit in housings with a shoulder, ensuring sealing in both directions.
It is used in gearboxes, centrifugal pumps, electric motors, compressors and transmission equipment. It is commonly found in production lines, treatment plants and agricultural machinery, where protection against leaks and dust is critical for the service life of bearings and gears.
To select the correct seal, verify that the shaft and housing dimensions match those of the equipment. The shaft surface must be free of burrs and have adequate hardness; the housing must be clean and free of deformation. During assembly, lubricate the lip and use an installation tool to avoid damage. If the shaft shows wear, consider a repair sleeve.
If you cannot find the exact size, we can offer you an equivalent seal or a neighboring size within the same series. To do so, send us the original part number, the shaft and housing dimensions, and a photo of the part. That way we can cross-reference it with other brands and available alternatives.
To request a quote for the DBH 1152 oil seal or ask about a replacement, write to us on WhatsApp. At MR Accesorios Industriales we advise you so you can find the right part. Send us the part number and the dimensions of your equipment; we will reply shortly.
Dimensions
- Shaft (d)
- 37mm
- Housing bore (D)
- 76mm
- Height (h)
- 9.50/13.50mm
- Design
- A 369
Frequently Asked Questions
- What are the dimensions of the DBH 1152 oil seal?
- The DBH 1152 oil seal has a shaft diameter of 37 mm, a housing diameter of 76 mm and a height of 9.50/13.50 mm. These dimensions correspond to the A 369 design and are the ones you need to verify before replacing the seal in your equipment.
- How do I know if this oil seal is compatible with my equipment?
- You need to compare the shaft and housing dimensions with those of the original seal. If they match in shaft diameter (37 mm), housing diameter (76 mm) and height (9.50/13.50 mm), it is compatible. Also check the lip type and the direction of rotation.
- Can I request an equivalent oil seal if I don't have the part number?
- Yes. Send us the shaft and housing dimensions, a photo of the part and its application. With that data we can look for an equivalent seal or a neighboring size within the same series. Write to us on WhatsApp and we will advise you.