DBH 1101Pol radial shaft seal — 121.08 x 160.22 x 26.29

DBH 1101Pol is a reference of radial shaft seal, within Seals. Request a quote for 1101Pol via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 1101Pol oil seal is a radial lip seal, designed to close off the passage of oil or grease in equipment with a rotating shaft. Due to its dimensions of 121.08 mm shaft, 160.22 mm housing and 26.29 mm height, it is used in gearboxes, pumps and process equipment where lubricant must be retained and the ingress of dust or water stopped. It is a brand that MR supplies, with technical assistance to choose the correct replacement.

This item is a DBH 1101Pol radial shaft seal, with the following dimensions: shaft (d) 121.08 mm, housing (D) 160.22 mm and height (h) 26.29 mm. The indicated design is A 222, which corresponds to a seal with a sealing lip and metal body for press-fit mounting in the housing. It is a replacement part for rotating shafts where lubricant must be contained and the entry of contaminants prevented. It is supplied as part of the line of seals and oil seals that MR Accesorios Industriales offers for industrial maintenance.

Typical applications for this seal include gearboxes, centrifugal pumps, mixers, conveyors and power transmission equipment. In all these cases, the seal works on a rotating shaft and a fixed housing, and its function is to retain the oil or grease inside the assembly and block dust, water or particles that could wear the bearings. Due to its size, it is found in medium to large equipment, where disassembly and assembly require care to avoid damaging the lip.

To select and install this seal, verify that the shaft, housing and height dimensions match those of the equipment's housing and shaft. The shaft surface must be in good condition, free of grooves or wear, and the housing must be clean and free of burrs. During assembly, lubricate the lip with the same oil or grease used in the equipment and use an installation tool that presses on the metal body, never on the lip. If the shaft shows wear, evaluate a wear sleeve.

If you cannot find the code 1101Pol or need an equivalent size, send us the dimensions of the old seal (shaft diameter, housing diameter and height) and a photo of the part. With that data we can look for an alternative within the DBH line or other brands we supply. We can also advise you on the A 222 design and its variants according to the type of application and working conditions.

To request a quote for the DBH 1101Pol oil seal or ask about a replacement, write to us on WhatsApp and send us the code 1101Pol. At MR Accesorios Industriales we respond with the quote and the alternatives that best fit your equipment. You can also ask us about other seals, bearings, housings, chains and pulleys that are part of our industrial distribution catalog.