Radial shaft seal DBH 1022 — 52.00 x 68.00 x 13.00

DBH 1022 is a radial shaft seal reference, within Seals. Request a quote for 1022 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 1022 radial shaft seal is a lip seal designed to stop the passage of lubricant and block the ingress of dust, water or particles in equipment with a rotating shaft. Its dimensions of 52 mm shaft diameter, 68 mm housing bore and 13 mm height make it suitable for gearboxes, pumps and medium-sized electric motors. MR Accesorios Industriales supplies this brand and advises you so you can choose the correct seal for your application.

This item is a radial shaft seal from the DBH brand, identified with code 1022. Its dimensions are 52 mm shaft diameter (d), 68 mm housing bore diameter (D) and 13.00 mm height (h). The A 191 design corresponds to a single-lip configuration with a spring, intended to retain oil or grease in one direction and exclude contaminants from the outside. It is a common replacement part in rotating equipment where the shaft passes through a fixed housing.

Typical applications for a seal of this size include gearboxes, centrifugal pumps, electric motors, reducers and conveyor rollers. In all cases, the seal works on a rotating shaft and against a machined housing, and its function is to keep lubricant inside the assembly and prevent external agents from entering that would accelerate wear on bearings and gears.

To install it correctly, check that the shaft has no burrs or deep marks in the lip contact area, and that the housing is clean and free of deformation. Lubricate the lip with the same grease or oil used in the equipment before inserting it, and install the seal with a flat tool that presses on the outer edge, never on the lip. Selection depends on shaft speed, operating temperature and the type of fluid to be retained.

If you need a seal equivalent to 1022 or a nearby size, the most practical approach is to send us the complete code, a photo of the part and the dimensions measured with a caliper. With that information we can look for alternatives in the same brand or in others we supply, respecting shaft and housing diameters. We can also advise you if the A 191 design is not suitable for your equipment.

To request a quote for the DBH 1022 oil seal or ask about a similar size, send us the code on WhatsApp along with the quantity you need. At MR Accesorios Industriales we have more than 80 years of experience in the field and we help you identify the correct part so your equipment keeps running without leaks.