Radial shaft seal DBH 1007/85 — 15.87 x 28.55 x 9.52

DBH 1007/85 is a radial shaft seal reference, within Seals. Request a quote for 1007/85 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 1007/85 radial shaft seal is a lip seal designed for rotating shafts. Its function is to retain lubricant inside the housing and prevent the entry of dust, water or particles that accelerate wear on bearings and bushings. With dimensions of 15.87 mm shaft, 28.55 mm housing and 9.52 mm height, and an Mz design, it is used in equipment where space is limited and a reliable seal is required. MR Accesorios Industriales carries this official brand so you can resolve replacements with the exact size.

This item is a radial shaft seal from the DBH line, identified by the code 1007/85. Its standardized dimensions are: shaft diameter 15.87 mm, housing diameter 28.55 mm and height 9.52 mm. The Mz design corresponds to a single-lip configuration with spring, suitable for rotating shafts with lubrication. The lip elastomer runs on a ground sliding surface, while the outer body ensures the fit in the housing. It is a direct replacement part, not a generic component: the dimensions must match those of the original housing to prevent leaks.

Typical applications for this seal include gearboxes, pumps, electric motors, reducers and power transmission equipment. It is also found in machine tools, conveyors and hydraulic systems where oil or grease must be contained. Due to its compact size, it is common in assemblies with small-diameter shafts rotating at moderate speeds. In all cases, the seal protects the bearings and extends the service life of the assembly, preventing external contamination and lubricant loss.

For correct installation, verify that the shaft has no burrs or marks that could damage the lip. Lubricate the lip with the same oil or grease used in the equipment before inserting it. The seal must enter perpendicular to the shaft, without direct blows to the lip; use a tube or shim that presses on the outer diameter. The 9.52 mm height defines the space required in the housing. If the shaft shows wear, consider a neighboring size or a repair sleeve. Selection depends on speed, temperature and fluid type, so it is always advisable to check against the manufacturer's data sheet.

If you need an equivalent or a close size, the most practical approach is to send us the code 1007/85 or the current seal dimensions. With that data we can look for alternatives in the same series or in other brands we carry. We can also advise you if the housing has different tolerances or if the shaft has been ground. You do not need to have the original part number: the shaft diameter, housing diameter and height are enough to guide the search. Write to us on WhatsApp and we will reply with the available options.

MR Accesorios Industriales carries the DBH brand as part of its line of seals and oil seals. If this seal is for a machine in operation, do not wait for the leak to damage the bearings: send the code 1007/85 on WhatsApp and we will quote you. We can also help you identify the size if you have doubts. With more than 80 years in the industry, we resolve seal replacements for industry.