DBH 1006 radial shaft seal — 33.32 x 46.05 x 8.63

DBH 1006 is a reference of radial shaft seal, within Seals. Request a quote for 1006 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 1006 radial shaft seal is a lip seal designed to retain lubricant and exclude contaminants on rotating shafts. With dimensions of 33.32 mm shaft diameter, 46.05 mm housing diameter and 8.63 mm height, and an Lx design, it is used in gearboxes, pumps, electric motors and transmission equipment. MR Accesorios Industriales sells this brand so you can replace worn seals with the exact size and maintain the sealing of your equipment.

This item is a DBH radial shaft seal, identified with the code 1006. Its dimensions are: shaft diameter (d) 33.32 mm, housing diameter (D) 46.05 mm and height (h) 8.63 mm. The Lx design corresponds to a single lip seal with spring, suitable for rotating lubricated shafts. The designation 1006 is the reference you will find on the manufacturer's data sheet and on the seal itself. It is a sealing component that works on the shaft and inside a machined cavity, and its function is to prevent oil or grease leaks and the entry of dust, water or particles.

Radial shaft seals such as the DBH 1006 are used in a wide variety of industrial equipment: gearboxes, centrifugal pumps, electric motors, compressors, machine tools, conveyors and belt or chain drive systems. Whenever there is a shaft rotating inside a housing and the lubricant must be kept in and contamination out, this type of seal fulfills that function. It is also used in applications exposed to splashes or dusty environments, since the retaining lip forms a dynamic barrier.

To install a radial shaft seal, check that the shaft has no burrs or marks and that the sealing surface is polished. Lubricate the lip with the same oil or grease used in the equipment before inserting it, and use a tube or socket of the appropriate diameter to push it in evenly to the bottom of the housing. Avoid striking it directly on the lip. When selecting a replacement, in addition to the dimensions, take into account the design type, the lip material and the spring, because thermal and chemical resistance depend on these. If the original seal has a different designation, always compare the three dimensions.

To quote a seal equivalent to the DBH 1006, the most practical thing is to send us the full code, a photo of the old seal or the dimensions measured with a caliper. With that data we can find the exact reference within the DBH line and other brands we sell. We can also guide you if the housing has a slightly different diameter or if the available width is different. The more data you give us, the faster the response will be.

To request a quote for the DBH 1006 oil seal or ask about an alternative, send us the code on WhatsApp to MR Accesorios Industriales. We will reply with the options that best fit your equipment. We work with leading brands, and we can advise you so you choose the right seal and avoid downtime due to leaks.