RINGSPANN Power transmission

Conical shaft-hub connections are fastening elements that transmit torque by radial tightening between a shaft and a hub, without the need for a key or additional machining. They are mounted in the annular space between both parts and, when actuated, generate uniform pressure that locks the connection. MR Accesorios Industriales offers the RINGSPANN line in Buenos Aires, Argentina, with technical advice to select the size according to each application's part number.

The designation of these connections is organized by numeric blocks that identify the series and the size. In the examples of the line, part numbers such as 4201-020001-000000 or 4201-032001-000000 keep the prefix 4201 and vary in the central segment, which references the construction size. The final zeros correspond to configuration variants within the same family. To request a quote, it is enough to indicate the complete part number shown on the drawing or on the part to be replaced.

They are used in drives where pulleys, gears, couplings or flywheels need to be fastened onto smooth shafts, with or without a keyway. They are common in machine tools, process equipment, conveyors, pumps and drive systems in industrial plants in Argentina. They also appear in applications where frequent disassembly requires a detachable connection without damaging the shaft or hub, something that a key does not always allow.

To select the correct connection, you must consider the shaft diameter, the hub diameter, the torque to be transmitted and the axial or radial loads present. Mounting requires cleaning and checking the conical surfaces, applying the indicated lubricant and respecting the screw tightening sequence. Alignment between shaft and hub must be checked before tightening, and the available axial clearance conditions the type of element to choose.

Conical connections from different brands can be interchanged if the mounting dimensions, torque range and actuation type match. It is not enough for the part number to be similar: the cone geometry, the number and size of the screws and the permissible surface pressure must be compared. If in doubt, it is advisable to compare drawings or send the measured dimensions so that the technical team can validate the equivalence.

MR Accesorios Industriales offers the RINGSPANN line as exclusive representative in Argentina, with more than 80 years of experience in power transmission. If you need a shaft-hub connection for a machine or a spare part, send the part number or the shaft and hub dimensions on WhatsApp and we will reply shortly with the corresponding alternative.

RINGSPANN shaft-hub locking assemblies are tapered clamping elements that allow mounting pulleys, gears, cams or any hub onto a shaft without a keyway. When the screws are tightened, the inner cone expands and generates uniform pressure that locks the assembly by friction. This simplifies the design, eliminates shaft weakening from a keyway and makes fine adjustment of the angular position easier. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina, with technical advice to select the right model.

The designation of these locking assemblies is organized by numeric codes that identify the size and variant. For example, the 4202 series includes references such as 4202-003100-000000, 4202-004100-000000 and 4202-005100-000000, where the first digits indicate the nominal diameter and the following digits the mounting configuration. The numeric suffixes differentiate versions with a different adjustment range or number of screws. To correctly interpret each code, it is advisable to consult our technical team and verify the specific application.

These locking assemblies are used in a wide variety of industries in Argentina: food, chemical, petrochemical, cement, paper and metalworking. They are common in the mounting of pulleys for belts, sprockets for chains, couplings, flywheels and gear wheels. They are also used in process equipment, agitators, pumps and fans, where reliable and removable fastening is required. Their ability to transmit torque without backlash makes them suitable for dynamic and precision positioning applications.

To select a shaft-hub locking assembly, take into account the shaft and hub diameter, the torque to be transmitted, the axial and radial loads, and the environmental conditions. Mounting requires cleaning the surfaces, checking concentricity and applying the specified tightening torque. Lubrication of the screws and the use of suitable washers ensure uniform pressure distribution. In applications with vibration or alternating loads, it is essential to respect the tightening values and monitor wear.

RINGSPANN shaft-hub locking assemblies can be interchanged with equivalent products from other brands, as long as the dimensions, adjustment range and torque capacity are verified. Matching the diameter is not enough: surface pressure, material and cone type must be compared. At MR Accesorios Industriales we can guide you on the right equivalent based on the original part number and the service conditions.

If you need a shaft-hub locking assembly for your application, write to us on WhatsApp with the part number or model you are looking for. At MR Accesorios Industriales we reply promptly with the technical information and the corresponding quote. We can also advise you if you have doubts about selection or mounting.

The shrink disc is a shaft-hub connection component that transmits torque by friction, without a keyway or backlash. It is mounted on the hub and, when its screws are tightened, compresses the hub against the shaft, creating a rigid and removable connection. It is used in power transmission, gearboxes, machine tools and equipment where high precision and reliability are required. MR Accesorios Industriales supplies the RINGSPANN line in Buenos Aires, Argentina.

The designation of RINGSPANN shrink discs is organized by series and numeric codes. In the RLK 603 series, examples such as 4200-014301-000000, 4200-016301-000000 and 4200-020301-000000 show a structure where the middle digits identify size and configuration. The numeric suffixes differentiate variants of diameter, number of screws or mounting type. To select the correct model, it is essential to cross-check the complete part number with the shaft and hub dimensions. MR Accesorios Industriales can assist you in interpreting each reference.

These discs are used in industries in Argentina such as metalworking, food, cement, mining and petrochemical. They are found in gearboxes, pumps, fans, conveyor belts, machine tools and process equipment. Their ability to transmit high torque without a keyway makes them ideal for smooth shafts, where stress concentration or wear is to be avoided. They are also used in applications with reversing rotation or dynamic loads, where a friction-tightened connection offers advantages over traditional systems.

To select a shrink disc, the shaft diameter, the hub outer diameter, the torque to be transmitted and the environmental conditions must be considered. Mounting requires clean surfaces, screw lubrication as specified and progressive tightening in a cross pattern to avoid deformation. Alignment between shaft and hub must be careful; once tightened, the disc does not allow misalignment. Screw lubrication is key to achieving the correct tightening force. If in doubt, consult our technical team.

Regarding equivalents, RINGSPANN shrink discs can replace other shaft-hub connection systems from different brands, as long as the dimensions and torque capacity are respected. Direct interchangeability should not be assumed based on size alone; the geometry and tightening values must be verified. Each manufacturer defines its own tolerances and materials. Therefore, when looking for a replacement, it is essential to compare the technical specifications and consult a specialist.

If you need a RINGSPANN shrink disc, write to us on WhatsApp with the part number or model you are looking for. At MR Accesorios Industriales we reply promptly and help you find the right solution for your application. We can also advise you if you have doubts about selection or mounting. More than 80 years of experience back us as a supplier of power transmission components in Buenos Aires, Argentina.

The RINGSPANN metal bellows coupling is a power transmission element that joins two shafts and absorbs misalignments with no appreciable angular backlash. The steel bellows, instead of an elastomer, gives it torsional rigidity and makes it suitable for repeatable positioning movements. It is used in servomotors, encoders, spindles and mechanisms where coupling backlash would ruin precision. MR Accesorios Industriales supplies it in Buenos Aires, Argentina, with more than 80 years in the industrial sector.

The designation is read in two parts: first the series, WK1 or WK2, and then the size. The number that follows the letters indicates the construction family, and the size defines the capacity of each body: in the catalog they appear from WK1 / size 5 and WK1 / size 10 up to WK1 / size 45 and WK1 / size 100, while the WK2 series starts at WK2 / size 1 and WK2 / size 5. To request a quote, provide the complete part number exactly as it appears on the drawing or on the equipment nameplate.

These couplings are seen in Argentine industry on servomotor beds, ball screws of machine tools, encoder shafts, dosing and packaging, and in automation equipment where repeatability is needed. They also appear in precision pumps and in laboratory or metrology drives. Since they have no elastomer, they tolerate temperature better and do not suffer the typical aging of a rubber spider, although they require more careful alignment.

To choose well, first look at the nominal torque and the peak that the drive will withstand, then the admissible shaft diameter at each hub and finally the misalignment the bellows allows: angular, radial and axial. During assembly, align the shafts before tightening the fastening screws, verify the available axial clearance and avoid forcing the bellows to compensate for a bedplate error. Lubrication does not apply to the bellows, but it is advisable to keep the area clean and check the tightening of the set screws.

Among brands, metal bellows couplings are interchanged by performance: shaft diameter, torque, torsional rigidity and admissible misalignment. There is no universal equivalence table, so replacement is resolved by comparing those variables and the mounting dimensions. If you have the RINGSPANN part number or the equipment model, send it on WhatsApp to MR Accesorios Industriales and we will quote you shortly.

The RINGSPANN REB DCO series pin and bushing coupling is a power transmission component that connects two shafts and transmits torque through pins and elastomeric bushings. It is used in equipment where misalignment must be absorbed and vibrations damped without losing transmission capacity. MR Accesorios Industriales carries this line in Buenos Aires, Argentina, and advises you on choosing the model for your application.

The REB DCO series designation is read step by step: the letters REB identify the pin and bushing coupling family; the four-digit number that follows, as in REB 0105 DCO or REB 0228 DCO, indicates the size within the series; and the DCO suffix distinguishes the construction variant. Examples REB 0105 DCO, REB 0116 DCO, REB 0125 DCO, REB 0144 DCO, REB 0162 DCO, REB 0178 DCO, REB 0198 DCO and REB 0228 DCO show the progression of available sizes. To select the correct coupling, provide the complete part number shown on your equipment or drawing.

These couplings are used in Argentine industries such as food, cement, mining, chemical, oil and power generation, among others. They appear in pumps, fans, conveyor belts, mixers, compressors and machine tools, where motion must be transmitted between shafts with a certain tolerance to misalignment. They are also used in continuous process equipment, where vibration damping helps protect bearings and gears. MR Accesorios Industriales carries them for replacement and new projects throughout the country.

To choose the coupling, take into account the nominal and maximum torque, rotation speed, shaft diameter and type of load. Verify the permissible misalignment: pin and bushing couplings allow a certain radial, angular and axial misalignment, but always within catalogue values. Mounting requires precise shaft alignment, tightening the pins to the recommended torque and checking the condition of the elastomeric bushings, which are wear parts. Lubrication is usually not required in these couplings, but periodic inspection is.

Regarding equivalents, pin and bushing couplings from different brands can be interchanged if shaft dimensions, torque and speed match. It is not enough for the part number to be similar: the technical data sheet of each manufacturer must be compared. If you need to replace a RINGSPANN coupling with another brand, or vice versa, it is advisable to validate interchangeability with a specialist. MR Accesorios Industriales can help you interpret the designations and find the right alternative for your equipment.

If you already have the part number of the coupling you need, send it via WhatsApp to MR Accesorios Industriales along with a photo or the equipment data. This way we can identify the exact variant and give you a response as soon as possible. If you cannot find it, write to us with the model or your shaft dimensions and we will guide you. We handle inquiries from all over the country from Buenos Aires, Argentina.

The RINGSPANN RWK EEO taper coupling is a power transmission component that rigidly connects two shafts by means of a taper mechanism. It is used when torque must be transmitted without backlash and with high concentricity, for example in machine tools, automation equipment or gearboxes. MR Accesorios Industriales carries this line in Buenos Aires, Argentina, and advises you on choosing the model according to shaft diameter and application.

The RWK EEO series designation reads in steps: the letters RWK identify the RINGSPANN taper coupling family, and the EEO suffix distinguishes the mounting variant. The four-digit numbers that appear in the examples, such as RWK 0014 EEO or RWK 0022 EEO, encode the construction size: the higher the number, the greater the shaft capacity and permissible torque. To select the correct model, you must cross-reference that code with the shaft dimensions and the application torque; looking at the number alone is not enough.

These couplings are used in industries that require precise and repeatable transmission. In Argentina they are commonly seen in machining cells, packaging lines, linear motion equipment, test benches and special machines. They also appear in applications where space is limited and a compact shaft connection is needed, without the clearances typical of other systems. As a precision component, their selection directly impacts the service life of bearings and gears downstream.

For assembly, keep in mind the cleanliness of the tapers and the absence of burrs: any contaminant affects the grip. Lubrication of the thread and taper must follow the manufacturer's instructions to achieve the correct tightening torque. Alignment between shafts is critical; although the coupling is rigid, poor alignment generates parasitic loads. Check axial and radial play before start-up, and repeat the check after the first hours of operation.

Regarding equivalences, RINGSPANN taper couplings can be interchanged with solutions from other manufacturers that use the same taper principle and dimensional range. There is no universal replacement table: each case requires comparing diameters, torque and fastening method. If you need to replace an existing coupling, the most practical approach is to send the complete part number or the shaft and flange dimensions. MR Accesorios Industriales can help you find the appropriate alternative within its power transmission line.

If you already have the coupling part number, write to us via WhatsApp and we will quote you promptly. You can also ask us about variants of the RWK EEO series or other taper coupling models. At MR Accesorios Industriales we bring more than 80 years of supporting Argentine industry with transmission components, bearings and housings. Send us the model you need and we will respond with the technical and commercial information.

RINGSPANN FGR series freewheels are power transmission components that allow rotation in one direction and lock movement in the opposite direction. They are used to prevent backstopping, control intermittent indexing or as a safety mechanism in industrial equipment. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina, with technical advice to choose the right configuration for each application.

The FGR series designation is read in blocks: the letters identify the freewheel family, the first number indicates the size or nominal diameter, and the letter R indicates a construction variant. The suffixes A1A2, A2A3, A2A7 or A3A4 correspond to specific configurations for mounting, sealing or internal bearing type. For example, FGR 12 R A1A2 and FGR 15 R A2A3 share the same logic: the number changes the size and the A codes define functional details that must match the application.

These freewheels are used in belt and roller conveyors, accumulation conveyors, elevators, mills, mixers, presses and intermittent indexing systems. In Argentina they are found in food processing plants, cement plants, petrochemical plants, steel mills and the plastics industry. They also appear in lifting equipment and machine tools where backstopping must be prevented or movements synchronized without external controls.

To select a freewheel, review the free rotation direction, the locking torque, the rotational speed, the mounting type and the environmental conditions. The sealing protects against dust and moisture; lubrication must be as specified by the manufacturer and renewed according to use. Alignment between shafts is critical to avoid lateral loads. During assembly, verify that the raceway and rollers are clean and that the freewheel is correctly seated.

RINGSPANN freewheels can be interchanged with equivalent products from other brands, but equivalence is not automatic: mounting dimensions, permissible torque, limiting speed and sealing type must be compared. Matching the outer diameter is not enough. Therefore, it is advisable to request a quote with the complete part number and, if possible, with a drawing or photo of the assembly where it is mounted.

MR Accesorios Industriales supplies RINGSPANN freewheels in Buenos Aires, Argentina, with more than 80 years of experience in power transmission. If you need an FGR 12 R A2A7 or any other variant, send us the part number via WhatsApp and we will respond promptly with technical information and a quote.

RINGSPANN SF series freewheels are power transmission components that allow rotation in one direction and lock in the opposite direction. They are used as backstops, for intermittent indexing or as safety devices in machines. MR Accesorios Industriales supplies them in Buenos Aires, Argentina, with more than 80 years of experience in the field. If you need one, send us the part number via WhatsApp and we will quote you.

The SF series designation combines a number that indicates the size and a suffix that defines the variant. For example, in SF 42-21 SF, SF 46-21 SF or SF 56-21 SF, the first number is associated with the outer diameter or the size of the assembly, while the second block (21, 25, 50) identifies the width or the type of construction. Models SF 82-25 SF, SF 107-25 SF, SF 127-25 SF and SF 140-50 SF follow the same logic. To choose the right one, have the shaft diameter, the available space and the required direction of rotation on hand.

These freewheels are used in industries such as food, metallurgy, textile and plastics, in conveying equipment, mixers, presses and machine tools. In Argentina, they are commonly found in production lines that need to prevent reverse rotation or synchronize movements. They are also used in gearboxes and transmission systems where a reliable one-way coupling is required. MR Accesorios Industriales offers them for replacement and new projects throughout the country.

To select an SF freewheel, verify the torque it must transmit, the rotation speed and the environmental conditions. Assembly requires precise alignment between the shaft and the housing, and proper lubrication according to the operating regime. The sealing protects against dust and moisture, so it is advisable to check the type of radial shaft seal if the equipment operates in dirty environments. If space is limited, consider the narrower variant. Always follow the manufacturer's instructions for tightening and concentricity.

RINGSPANN freewheels can be interchanged with those of other brands if the main dimensions, the permissible torque and the direction of rotation match. However, each manufacturer defines its own tolerances and capacities, so the substitution must be validated with the technical data. At MR we advise you to find the right equivalent within the SF series or other lines. Interchangeability is not automatic: always compare the specifications before replacing.

If you already have the part number of the freewheel you need, write to us via WhatsApp and we will quote you promptly. We can also help you identify the model if you send us the shaft and housing measurements, the torque and the working conditions. We handle inquiries from all over the country from Buenos Aires, Argentina.

RINGSPANN BA series freewheels are power transmission components that allow rotation in one direction and lock movement in the opposite direction. They are used to prevent backstopping, control intermittent feeds or couple shafts depending on the direction of rotation. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina, and advises you on choosing the right model for your application.

The BA series designation is read with the fixed letters and a number that indicates the size. For example, BA 12 R, BA 15 R and BA 20 R share the same logic: the central number identifies the dimensional variant and the final letter R distinguishes the configuration. Models such as BA 25 R, BA 30 R or BA 35 R follow the same criterion. To select the right one, send us the full part number shown on your equipment or drawing.

These freewheels are used in Argentine industries such as food, metallurgy, cement and logistics. They are present in conveyor belts, bucket elevators, gearboxes, machine tools and drive systems where backstopping must be prevented or free rotation in one direction must be allowed. They are also used in pumping and ventilation equipment that requires protection against reverse rotation.

To select a BA freewheel, take into account the torque it must transmit, the rotational speed, the mounting type and the environmental conditions. Sealing and lubrication are key to performance: verify that the lubricant is suitable and that the mounting is aligned with the shaft. If there is dust, moisture or extreme temperatures, choose the corresponding protection. Forced or misaligned mounting shortens the service life of the component.

RINGSPANN freewheels can be interchanged with those of other brands if the mounting dimensions, torque and direction of rotation match. A similar part number is not enough: the data sheet must be compared. At MR Accesorios Industriales we can help you find the right equivalent within the RINGSPANN line or with compatible alternatives, as long as you provide the application data.

If you need a RINGSPANN BA series freewheel, write to us on WhatsApp with the part number or model you are looking for. At MR Accesorios Industriales we will reply shortly with the technical information and the corresponding quote. We can also advise you if you are not sure which variant fits your equipment: send us a photo of the nameplate or the component and we will review it together.

RINGSPANN precision clamping systems are components designed to secure and center elements in power transmission applications. They are used to secure discs, gears, pulleys or other components onto shafts, ensuring reliable torque transmission and precise alignment. MR Accesorios Industriales sells these solutions as exclusive representative in Argentina, providing technical advice to select the right system for the application.

The designation of these precision clamping systems is based on numeric codes that identify the size and configuration. For example, the 1001 series includes variants such as 1001-011001, 1001-015001, 1001-020001 and 1001-030001, where the middle digits usually indicate key dimensions, such as the nominal diameter. The final suffixes, such as 001 or 004, may indicate different designs or versions within the same size. To correctly interpret each code, it is advisable to consult our technical team and provide the complete code when requesting a quote.

These precision clamping systems are used in various industries in Argentina, such as metalworking, food, mining and power generation. They are used in machine tools, conveyors, mills, pumps and process equipment where secure and precise fastening of rotating components is required. Their ability to transmit high torques and withstand axial and radial loads makes them suitable for demanding environments.

To select the right clamping system, it is essential to consider the shaft diameter, the torque to be transmitted, the axial and radial loads, and the environmental conditions. Mounting requires thorough cleaning of the contact surfaces and adequate lubrication to prevent premature wear. Precise alignment between the shaft and the component to be secured is critical for correct operation and a long service life. In addition, clearance and interference must be verified according to the manufacturer's specifications.

Regarding equivalences and interchangeability, RINGSPANN precision clamping systems can be compared with products from other recognized brands, but each manufacturer has its own tolerances and materials. Therefore, it is important to validate dimensional and functional compatibility before replacing a component. Our team can advise you on the appropriate options and the technical considerations for a successful replacement.

To obtain a quote for RINGSPANN precision clamping systems, we invite you to send the code or model you need via WhatsApp. At MR Accesorios Industriales we will reply promptly with the technical and commercial information you require. With more than 80 years of experience, we are here to help you find the best solution for your application.

RINGSPANN precision locking elements are components designed to secure and center parts in power transmission systems. They are used to secure hubs, gears, pulleys and other elements on shafts, guaranteeing a firm and precise connection without the need for additional machining. Their design allows transmitting high torques and withstanding radial and axial loads, which makes them ideal for demanding industrial applications. MR Accesorios Industriales supplies these elements as exclusive representative of RINGSPANN in Argentina.

The designation of these locking elements is based on a numeric code that identifies the size and configuration. For example, the 1192 series includes references such as 1192-035004, 1192-040004 and 1192-046004, where the first digits indicate the type of element and the following ones the nominal diameter and other characteristics. The numeric suffixes allow selecting the appropriate variant for each application, ensuring a precise fit and efficient power transmission.

These elements are used in a wide variety of industries in Argentina, such as metalworking, food, mining and power generation. They are used in machine tools, conveyors, mills, pumps and process equipment, where reliable and repeatable locking is required. Their ability to transmit high torques and withstand vibrations makes them suitable for severe industrial environments.

To select the appropriate element, it is essential to consider the shaft diameter, the torque to be transmitted and the operating conditions. Mounting requires careful cleaning of the surfaces and the use of calibrated adjustment tools. Lubrication and sealing are key aspects to extend service life and avoid premature wear. In addition, correct alignment guarantees uniform load distribution.

Regarding equivalences and interchangeability, precision locking elements from different brands may differ in dimensions and capacities. Therefore, it is advisable to verify the technical specifications and consult with specialists before replacing a component. RINGSPANN offers a wide range that covers various needs, and MR Accesorios Industriales can advise you to find the most suitable solution.

If you need a quote for a RINGSPANN precision locking element, send the code or model via WhatsApp to MR Accesorios Industriales. Our technical team will reply shortly with the information necessary for your application. With more than 80 years of experience, at MR Accesorios Industriales we are prepared to provide the support your project requires.

The RINGSPANN thrust ring is a precision component used in clamping systems to transmit axial forces and ensure safe support in demanding assemblies. Its design allows it to be integrated into assemblies that require dimensional control and repeatability, such as in machine tools, automation equipment and clamping devices. MR Accesorios Industriales sells this line as exclusive representative in Argentina, with technical advice to select the right part number for the application.

The designation of these thrust rings is based on a numeric code from the 1116 series, followed by a six-digit block that identifies dimensions and variants. For example, 1116-011001 and 1116-015001 correspond to different sizes within the family; suffixes such as 002 or 003 usually indicate alternative versions of the same base size, such as tolerances or treatments. To choose the right one, it is essential to know the housing dimensions and the expected axial load.

These components are used in industries such as metalworking, automotive and food, in applications that require precise, low-friction axial support. In Argentina, they are commonly found in machine tool spindles, indexing systems, presses and testing equipment. They also appear in precision clamping devices for assemblies that must hold position under variable loads.

To select the right ring, take into account the shaft diameter, the housing dimensions and the magnitude of the axial force. It is essential to verify alignment between the contact surfaces and ensure adequate lubrication to prevent premature wear. Assembly must be carried out with tools that do not damage the thrust faces, and it is recommended to check axial clearance after installation.

RINGSPANN thrust rings can be interchanged with components from other manufacturers that perform similar functions, but the equivalence must be validated by comparing critical dimensions, load capacity and tolerances. It is not enough for the code to be similar: you must confirm that the design of the clamping system accepts the same operating conditions. If in doubt, consult the technical supplier.

If you need a thrust ring for your clamping system, write to MR Accesorios Industriales via WhatsApp with the part number or model you are looking for. The technical team helps you identify the correct variant and coordinate the quote promptly.

RINGSPANN torque limiters are safety components for power transmissions: they interrupt or limit torque when an overload exceeds the set value, thus protecting motors, gearboxes, shafts and machines. MR Accesorios Industriales supplies them in Buenos Aires, Argentina, as exclusive representative of the brand. They are used in production lines, conveyors, mixers and equipment where a blockage or sudden start can damage the mechanics. To request a quote, send the full part number via WhatsApp.

The designation of these RINGSPANN limiters is handled by numeric codes from the 3504 and 4470 series, such as 3504-000073, 4470-004800 or 4470-011800. Each code identifies a configuration with size, coupling type and factory setting. Since there are no standardized letters in the designation, the exact reference is the full number: with that data the component and its variants can be located. If you need a version that does not appear in the list, write to us on WhatsApp with the code or model and we will verify it.

In Argentine industry they are used in belt and chain conveyors, elevators, mixers, agitators, positive displacement pumps and mills. Also in machine tools and packaging equipment where a jam can break gears or shafts. The function is always the same: detect excess torque and release the transmission before the damage is greater. MR Accesorios Industriales supplies them to food, chemical, cement, mining and general manufacturing plants throughout the country.

When choosing a torque limiter, take into account the nominal torque of the transmission, the adjustment range, the reset type (manual or automatic) and the available space. Installation requires alignment between shafts and a flexible coupling that absorbs misalignments. Lubrication and sealing must follow the manufacturer's instructions so that the trip mechanism always responds the same way. If the equipment works with frequent starts or variable loads, the setting should be checked periodically.

RINGSPANN torque limiters can be interchanged with equivalent solutions from other European brands, but there is no universal equivalence table: each application defines the torque, speed and mounting type. Therefore, before replacing a component, compare the full code, the size and the adjustment range. At MR Accesorios Industriales we can guide you with the data of the original equipment and the code shown on the nameplate or in the drawing.

If you already have the code of the limiter you need, send it via WhatsApp to MR Accesorios Industriales and we will reply shortly. You can also send us a photo of the nameplate or the assembly to identify the correct variant. We work with RINGSPANN power transmission components and can advise you on the right configuration for your machine.

RINGSPANN RT series torque limiters are safety components for mechanical drives. They are installed between the motor and the load to disengage the motion when torque exceeds a set value, preventing damage to gears, shafts, chains or couplings. They are Belleville spring-actuated devices that, under overload, slip or disengage and can be reset. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina, with technical support to select the right model.

The RT series designation is read by nominal diameter and type of execution. For example, RT 30.1 and RT 30.2 share size 30 but differ in the mounting variant or adjustment range; the same applies to RT 40.1, RT 40.2 and RT 40.3, or to RT 45.1, RT 45.2 and RT 45.3. The numeric suffix after the dot indicates the design version: type of fixing, number of discs or reset method. To choose correctly, the complete part number must be identified and the performance tables consulted.

These limiters are used in drive lines where an overload can be catastrophic: chain conveyors, bucket elevators, mills, mixers, positive displacement pumps, woodworking machines, sheet feeding and bottling equipment. In Argentine industry they are found in food, cement, petrochemical and steel plants, and in agricultural machinery manufacturers. Their function is to act as a mechanical fuse: when torque exceeds the preset value, the limiter disengages and prevents costly breakages.

To select an RT limiter, the rated working torque, the maximum permissible torque, the shaft diameter, the type of coupling (direct, chain, pulley) and the environmental conditions must be defined. Installation requires precise alignment between shafts and adequate lubrication according to the environment. Reset can be automatic or manual depending on the model; check the direction of rotation and the available space. Cleanliness of the seat and the tightening torque of the screws are critical for reliable operation.

RINGSPANN RT series torque limiters can be interchanged with equivalent products from other European brands, but there is no universal correspondence of part numbers: each manufacturer defines its own dimensions and adjustment ranges. Therefore, when replacing a unit, it is essential to compare torque curves, shaft diameters and type of fixing. MR Accesorios Industriales can assist you with that technical comparison so the substitution is safe and does not affect machine performance.

If you need a torque limiter for your application, message us on WhatsApp with the complete part number (for example, RT 40.2) or with the machine data: required torque, shaft diameter and type of mounting. At MR Accesorios Industriales we reply shortly with the RINGSPANN alternative that best suits your needs.

The RINGSPANN RS series torque limiter is a safety component for power transmissions. It is installed between the motor and the load to interrupt transmission when torque exceeds a set value, preventing damage to gears, shafts, couplings or structures. The RS series covers different capacities and configurations, identified by numbers and suffixes that indicate size and mounting variant. MR Accesorios Industriales supplies this line in Argentina with technical advice to select the right model.

The RS series designation combines a number indicating the size and a suffix defining the mounting or drive variant. For example, RS 40.1 and RS 40.2 share the same size but differ in configuration; the same applies to RS 50.1, RS 50.2, RS 63.1, RS 63.2, RS 80.1 and RS 80.2. This logic allows you to choose the version according to the available space and the type of coupling. To request a quote, provide the complete code shown on the nameplate or drawing.

These limiters are used in industries where an overload can destroy equipment: food, cement, mining, steel, chemical, aggregate processing and process plants. In Argentina they are commonly found in conveyor belts, elevators, mills, mixers, positive displacement pumps and roller drives. They protect the entire drive train and reduce downtime due to breakage. MR Accesorios Industriales supplies them to plants and maintenance workshops throughout the country.

To select the correct model, you must define the nominal working torque, the trip torque, the speed, the shaft diameter and the type of coupling. The environment also matters: presence of dust, humidity or temperature. Installation requires careful alignment between shafts and precise adjustment of the trip torque according to the manual. Lubrication and sealing must follow the manufacturer's instructions to ensure repeatability. If you have doubts, send us your application data and we will help you choose.

RINGSPANN limiters can be interchanged with other brands of equivalent function, but there is no universal equivalence table: torque, mounting dimensions, shaft diameter and reset type must be compared. When replacing equipment, verify that the new limiter has the same capacity and coupling type. At MR Accesorios Industriales we can advise you on compatibilities and alternatives within the RS line.

If you need a torque limiter for your machine, write to us via WhatsApp with the RS code and the size shown on your equipment. We will reply shortly with technical information and a quote. We can also advise you if you are defining a new drive or replacing an existing component.

RINGSPANN remote control accessories are components that allow power transmission systems, such as clutches, brakes or valves, to be operated remotely from a safe or hard-to-reach position. They integrate into RCS systems and facilitate remote control in industrial equipment. MR Accesorios Industriales supplies these accessories in Buenos Aires, Argentina, and advises you so you can select the correct part number for your application.

The designation of these accessories combines a series number and a numeric code. For example, 5030-005002 and 5233-006001 correspond to different series within the remote control line. The first digits identify the functional group and the following ones the type of accessory. To choose the right one, you need to know the system it connects to and the function it will perform. If you have any doubts, send the complete code or a photo of the equipment by WhatsApp and we will help you identify it.

These accessories are used in industries such as metallurgy, cement, mining, food and materials handling. They allow clutches, brakes and other mechanisms to be actuated from panels or consoles, improving safety and efficiency. In Argentina, they are common in production lines, mills, conveyor belts and lifting equipment. MR Accesorios Industriales has more than 80 years of experience in power transmission and can advise you on compatibility with your system.

To select the correct accessory, take into account the type of remote control system, the operating distance, the environment (dust, humidity, temperature) and the type of actuation required. Installation must follow the manufacturer's instructions to ensure reliable operation. Proper lubrication and sealing extend service life. If you need technical assistance, contact us with your equipment data and we will advise you without obligation.

RINGSPANN accessories can be interchanged with those of other remote control system brands, but compatibility depends on dimensions and the type of connection. Not all codes are equivalent. That is why it is essential to verify the complete designation and specifications before replacing a component. If you cannot find the accessory you are looking for, write to us on WhatsApp with the code or model and we will help you source it.

To request a quote for RINGSPANN remote control accessories, send the code or model by WhatsApp to MR Accesorios Industriales. We will reply shortly with the information you need to move forward with your project. You can also ask us about other brands and power transmission products we supply.

RINGSPANN control cables are remote mechanical transmission components that allow a mechanism to be operated from a distance: they transmit motion and force between a control and the receiving element along a flexible path. They are used in RCS remote control systems and their connection accessories, where the cable is the link between the lever or actuator and the final mechanism. MR Accesorios Industriales supplies them in Buenos Aires, Argentina.

The designation of these control cables is read in numeric blocks: examples in the 1563 series start with 1563-001004, 1563-001005, 1563-001006 and 1563-001007, while the 2563 series appears as 2563-007001-000000 and 2563-009001-000000, and the 3561 series as 3561-010272 and 3561-010275. Each block identifies the group, the connection variant and the end configuration. To request a quote, the complete part number is the key data: it should not be interpreted, it should be passed exactly as is.

In Argentine industry these cables are found in lifting equipment and rigging, in road and agricultural machinery, in test benches and in installations where the control point is far from the mechanism. They also appear in motorized or manual doors and gates, in remote locking systems and in any assembly where operation from a safe or more convenient position is required. It is a typical solution for transmitting force without adding electrical or hydraulic components.

To properly select a control cable, consider the travel, the permissible bending radii and the type of fastening at each end, because the cable works inside a conduit and the routing affects performance. Check terminal alignment, avoid twisting and ensure proper lubrication and sealing in areas exposed to dust or moisture. Installation with wide curves and firm anchors reduces wear and maintains consistent response over time.

Regarding equivalences, control cables are compared by function, length and terminal type rather than by brand: different manufacturers use their own nomenclature and they are not always interchangeable without verifying the connection. If you need to replace an existing cable, the most practical approach is to send the original part number or model and the assembly dimensions. MR Accesorios Industriales supplies RINGSPANN as exclusive representative in Argentina and can advise you on the correct variant.

If you have the control cable part number at hand, send it via WhatsApp to MR Accesorios Industriales along with a photo of the end and the routing. With that information the variant is identified and we respond promptly. If you cannot find the exact part number, write to us anyway: we can search by series, terminal type or the application where it is installed.

RINGSPANN brake lever systems are remote control components that allow brakes to be actuated manually and safely from a distant position. They are used in machines and equipment where the brake is in a hard-to-reach place or where a comfortable control is needed for the operator. MR Accesorios Industriales supplies these systems in Argentina with technical advice to choose the right variant for the application.

The designation of these systems combines a base number, such as 4561-000001, followed by a suffix that begins with S, for example S50401, S50408 or S50410. The base number identifies the brake lever family, while the S suffix indicates the specific configuration of the system: lever type, length, fastening type or actuation variant. The examples show different S504xx and S505xx endings, which indicates construction options within the same series. To select the correct model, it is necessary to know the application and the brake to be actuated.

These systems are used in industries such as metallurgy, food, wood, ceramics and mining, where there are presses, conveyor belts, mills, mixers or machine tools with brakes that require remote actuation. In Argentina, they are common in production lines that need to stop shafts or drums from a control station. They are also used in lifting equipment and agricultural machinery. MR Accesorios Industriales supplies them throughout the country, with delivery to plant or workshop.

To choose the system, take into account the force needed to actuate the brake, the travel of the cable or rod, and the space available to mount the lever. Verify compatibility with the existing brake: connection type, thread and travel. Mounting must ensure correct alignment to avoid lateral stresses and premature wear. Lubrication of the moving points and firm fastening are key for smooth and long-lasting operation. If the environment has dust or humidity, consider additional protections.

RINGSPANN remote control systems can be interchanged with solutions from other manufacturers, but the equivalence is not direct: mounting dimensions, travel and connection type must be compared. The part number alone is not enough; many times it is necessary to review drawings or samples. Therefore, when consulting, send the complete part number of the system you need or the model of the brake it is intended for. That way we can identify the correct variant within the series.

If you are looking for a RINGSPANN brake lever system, write to us via WhatsApp with the part number or the model shown on your machine. At MR Accesorios Industriales we respond shortly with the alternative that best suits your application. We can also advise you if you need to replace an existing system or adapt a new one to your equipment.

RINGSPANN CSF cardan shafts are power transmission components that transmit motion between misaligned shafts, with variable misalignment angles. They are used in a wide variety of industrial machines, from conveyors to process equipment, where flexibility and robustness are key. MR Accesorios Industriales sells this line as exclusive representative in Argentina, with technical advice to choose the right size.

The CSF designation identifies the RINGSPANN cardan shaft family. The size is indicated by a four-digit number, as in the examples CSF / size 2065, CSF / size 3052 or CSF / size 3078. That number is not an arbitrary code: it condenses the transmission capacity and the main dimensions of the shaft. When requesting a quote, the size is the data that defines the product, so it is best to have it on hand along with the type of connection required.

In Argentine industry, CSF cardan shafts are found in linear motion equipment, conveyors, machine tools, pumps, fans and drive systems in general. Their ability to work with misaligned shafts makes them suitable for assemblies where perfect alignment is not possible or where there are vibrations. They are also used in mobile applications and in machines that require position adjustments during operation.

To select a CSF cardan shaft, consider the torque to be transmitted, the rotation speed, the working angle and the environmental conditions. Sealing and lubrication are critical: a good radial shaft seal prevents the entry of contaminants and the loss of lubricant, extending service life. Initial alignment and universal joint play must be checked according to the manufacturer's instructions. In assemblies with large angles, an intermediate support may be necessary.

Cardan shafts are interchangeable between brands if the flange dimensions, journal diameter and length match. RINGSPANN offers a standardized line, but it is always advisable to verify compatibility with the original equipment. MR Accesorios Industriales can guide you on equivalents and options that apply in the local market, without compromising system performance.

If you need a CSF cardan shaft, message us on WhatsApp with the size or the full part number. At MR Accesorios Industriales we quote you shortly and advise you so that the replacement is the right one. You can also ask us about other brands and special configurations.

The RINGSPANN CSL cardan shaft is a power transmission component designed to connect shafts and transmit torque between shafts that are not perfectly aligned. It is used in industrial drives where there is angular misalignment or radial displacement, and it allows continuous rotation at high torques. MR Accesorios Industriales supplies this line in Argentina as exclusive representative of the brand. If you need to select a size, send us the part number on WhatsApp and we'll advise you.

The CSL designation identifies the RINGSPANN cardan shaft family. The number after the slash indicates the construction size: for example, CSL / size 2065, CSL / size 3052 or CSL / size 3078. Each size groups a set of dimensions and torque transmission capacities, and the numeric suffixes distinguish variants within the same series. To choose the right one, you have to match the size against the application conditions: torque, speed, working angle and type of connection to the shafts.

These shafts are used in industries in Argentina such as metallurgy, cement, paper, mining and food, in drives for pumps, fans, conveyor belts, mixers and machine tools. They also appear in lifting equipment and in transmissions where misalignment between the motor and the load must be compensated for. As a transmission component, correct selection has a direct impact on the service life of bearings and couplings.

To select a CSL cardan shaft, take into account the nominal and maximum torque, the rotation speed, the permissible misalignment angle and the working environment. Installation requires aligning the ends within the manufacturer's tolerances and checking the axial play. Lubrication of the universal joints and sealing against dust and moisture are key to preventing premature wear. If the equipment runs with vibrations, it is advisable to check the balance and the tightening of the connections.

RINGSPANN cardan shafts can be interchanged with other brands that use similar size-based designation systems, but there is no universal equivalence: each manufacturer defines its own dimensions and capacities. Therefore, to replace an existing shaft, the safest approach is to compare the mounting dimensions, the journal diameter and the permissible torque. At MR Accesorios Industriales we help you interpret the part number and find the variant that best suits your machine.

If you already have the part number of the cardan shaft you need, message us on WhatsApp and we'll send you a quote shortly. We can also advise you if you are building a new transmission or if you have doubts about which CSL size to choose. At MR Accesorios Industriales we bring more than 80 years of experience in industrial components so your equipment keeps running.

The RINGSPANN CSS drive shaft is a power transmission component designed to connect misaligned shafts and transmit torque at variable working angles. It is used in drives where the equipment layout requires an articulated joint that follows the movement without losing rotational capacity. MR Accesorios Industriales sells this line in Argentina as exclusive representative of RINGSPANN, with technical advice to choose the right size for the application.

The CSS series designation is completed with the size, which identifies each model within the family. Examples include configurations such as CSS / size 2065, 3052, 3053, 3062, 3065, 3070, 3075 and 3078. This numbering lets you quickly locate the drive shaft in the manufacturer's table and cross-reference dimensions, capacities and connection type. To request a quote, send us the exact size shown on your equipment or drawing.

CSS drive shafts are used in industries that require flexible transmission: machine tools, lifting equipment, roller drives, conveyors and positioning systems. In Argentina they are found in metallurgical, food and process plants, where alignment between motor and mechanism is not perfect or varies during operation. The universal joint absorbs these misalignments and keeps transmission continuous.

To select a drive shaft, consider torque, rotational speed, working angle and environment. Check the condition of the universal joints and internal bearings, lubrication and sealing against dust or moisture. During assembly, verify end alignment and axial play. Proper lubrication and periodic clearance checks extend the service life of the component.

Drive shafts are sold under different nomenclatures depending on the manufacturer. The RINGSPANN CSS series may have functional equivalents in other brands, but interchangeability depends on connection dimensions, torque capacity and permissible angle. Do not replace one model with another without verifying these parameters. If you need a replacement, send us the full part number and main dimensions so we can evaluate the alternative.

If you have the part number or size of the drive shaft you need, write to us on WhatsApp. At MR Accesorios Industriales we help you identify the model and send you a quote promptly. We can also advise you if you are building a new drive and want to define the most suitable CSS series for your equipment.

The brake disc is the rotating component that the pads or calipers of an industrial brake act on to stop or control the speed of a shaft. RINGSPANN offers discs in different sizes, identified by their diameter in millimeters, which are selected according to the equipment and the energy to be dissipated. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina, and advises you so you choose the right disc for your application.

The designation of these discs is straightforward: it states brake disc and the diameter in millimeters. That is why you will find everything from compact sizes such as 125 mm or 150 mm up to large diameters such as 1 000 mm, including 200, 250, 300, 355 and 430 mm. The diameter is the main data point for mounting and braking capacity, since it defines the contact surface and the torque the system can generate. If your equipment requires another size, contact us with the exact diameter you need.

These discs are used in industrial brakes on machines and equipment where movement must be stopped or regulated safely. Typical applications include presses, cranes, overhead cranes, conveyor belts, mills, mixers and lifting systems. In Argentina, the sectors that use them most are the metalworking, mining, cement, food and port logistics industries. Choosing the right diameter allows the disc to be integrated into the existing brake without major modifications.

To select the disc, take into account the diameter the brake accepts, and the thickness and material of the disc, which must be compatible with the pads and the caliper. Also check the maximum peripheral speed and the energy the brake must dissipate at each stop. During mounting, ensure the disc is aligned with the shaft and parallel to the pads to avoid uneven wear and vibration. Cleaning the friction surfaces and the correct torque of the fastening bolts are key to reliable operation.

If you need to replace a disc from another brand, the most practical approach is to compare the outer diameter, inner diameter, thickness and hole pattern. A RINGSPANN disc can often be exchanged for the original if these critical dimensions match. However, each manufacturer may have variations in material and heat treatment, so it is advisable to verify compatibility with the brake manufacturer or with our technical team before mounting.

To request a quote for the RINGSPANN brake disc you need, message us on WhatsApp stating the diameter in millimeters and, if possible, a photo or the brake part number. At MR Accesorios Industriales we reply shortly with availability and the alternatives for your equipment. With more than 80 years in the market, we back every sale with technical advice and the experience of those who know industrial brakes.

The RINGSPANN KE FHK locking unit is an industrial braking component that is mounted on shafts and used to hold loads or generate braking in machines. It is part of the RINGSPANN industrial brakes line, exclusive representative in Argentina. It is used in applications requiring safe and repeatable locking, such as presses, machine tools or lifting systems. MR Accesorios Industriales supplies this series with technical advice to select the right model.

The KE # FHK designation is interpreted as follows: the letters KE identify the RINGSPANN locking unit family; the number that follows indicates the size or nominal mounting diameter, and the FHK suffix indicates a specific construction variant within the series. For example, models KE 32 FHK, KE 37 FHK, KE 42 FHK and KE 47 FHK correspond to different sizes, while KE 57 FHK, KE 70 FHK, KE 90 FHK and KE 105 FHK cover larger ranges. To request a quote, simply indicate the complete part number shown on the nameplate or in the drawing.

These locking units are used in Argentine industries such as metalworking, food, cement and shipbuilding. They are found in presses, punching machines, cutting machines, lifting systems, overhead cranes and positioning equipment. They are also used in test benches and machine tools where a shaft needs to be locked precisely. Their function is to hold a load fixed or act as a holding brake in intermittent cycles.

To correctly select a KE FHK unit, take into account the shaft diameter, the required braking torque, the available space and the environmental conditions. It is essential to verify alignment between the shaft and the housing, and to ensure a clean, flat mounting surface. Proper lubrication and sealing against dust and humidity extend service life. Follow the manufacturer's instructions for bolt tightening and axial clearance.

RINGSPANN locking units can be interchanged with equivalent products from other brands, but it is essential to compare mounting dimensions, torque capacity and type of locking. Not all series are directly interchangeable. Therefore, before replacing a unit, verify the complete part number and consult our technical team. At MR Accesorios Industriales we advise you to find the right alternative.

If you need a RINGSPANN KE FHK locking unit, write to us via WhatsApp with the part number or model you are looking for. We will quote you promptly and help you confirm the correct variant for your application. MR Accesorios Industriales, Buenos Aires, Argentina, with more than 80 years of experience in power transmission.

The RINGSPANN KE FPK series industrial brake is a clamping unit mounted on transmission shafts to immobilize or position loads with precision. It is used in applications where motion must be stopped in a controlled way, such as machine tools, lifting equipment or production lines. Its compact design allows it to be integrated into tight spaces, and its pneumatic or hydraulic actuation depending on the model makes it suitable for repetitive cycles.

The designation KE ... FPK is read in steps: the letters KE identify the family of clamping units, the number that follows — as in KE 40 FPK, KE 50 FPK, KE 63 FPK, KE 80 FPK or KE 100 FPK — indicates the construction size, and the FPK suffix distinguishes the mounting or actuation variant within the series. The higher the number, the greater the capacity of the unit. To choose the correct model, the complete code must be cross-referenced with the working conditions.

These brakes are used in industries such as metalworking, food, logistics and mining, where shafts must be locked safely. In Argentina they are found in presses, conveyors, cranes, winders and rotary tables. MR Accesorios Industriales supplies them as exclusive representative in Argentina, with advice on selecting the right unit according to the load and the environment.

To select a clamping unit, consider the braking torque, the shaft diameter, the type of actuation and the environmental conditions. Mounting requires careful alignment with the shaft and the support surface, as well as respecting the recommended axial clearance. Lubrication and sealing must be compatible with the environment: dust, humidity or extreme temperatures may require additional protection. Incorrect mounting accelerates wear and reduces precision.

RINGSPANN clamping units can be interchanged with equivalent products from other manufacturers, but equivalence is not automatic: mounting dimensions, torque and type of actuation must be compared. A similar code is not enough. Therefore, before replacing a unit, it is advisable to check the data sheet and consult a specialist. At MR Accesorios Industriales we can guide you with the data from the original equipment.

If you need a RINGSPANN KE FPK series industrial brake, write to us on WhatsApp with the code or model you are looking for. We will quote you shortly and help you confirm that the unit is the right one for your application. We can also advise you if you are replacing an existing component or designing a new machine.