Flange yoke RINGSPANN Horquilla T / tamaño de cardán 3075

RINGSPANN Horquilla T / tamaño de cardán 3075 is a cardan shaft reference, within Power transmission. Request a quote for Horquilla T / tamaño de cardán 3075 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The T yoke is a transmission component mounted at the end of a drive shaft. Its flange with jaw teeth allows a detachable, centered connection with the opposite flange, transmitting torque with negligible play. It is used in drive lines where rigidity and easy disassembly are required, such as machine drives, process equipment and industrial transmission systems. MR Accesorios Industriales supplies this RINGSPANN line in Buenos Aires, Argentina.

The designation T yoke corresponds to a flanged yoke with jaw teeth from the RINGSPANN catalogue. The number that follows it, as in the examples 3065 and 3075, identifies the drive shaft size: the higher the number, the greater the transmission capacity and coupling dimensions. The jaw teeth ensure drive and centering between flanges. To select the correct size, this number must be matched with the drive shaft size of the shaft or the mating flange.

These yokes are used in drive shaft transmissions of machine tools, packaging equipment, pump and fan drives, and generally in lines where motion must be transmitted between non-aligned shafts. In Argentina, they are found in food and chemical plants and in the metalworking sector. They are also used in mobile equipment and test benches. Their flange with jaw teeth facilitates assembly and disassembly without special tools, which simplifies maintenance.

To choose the T yoke, check the drive shaft size of the assembly: it must match that of the opposite flange. Check the condition of the jaw teeth and the centering; wear or misalignment generate vibration and premature failures. Lubrication of the joint and control of the angular play are key to service life. During assembly, ensure uniform tightening of the screws and verify shaft alignment before start-up.

Flanged yokes with jaw teeth are available from different brands, but they are not always interchangeable: flange diameter, number and pitch of teeth, and hub depth vary. Therefore, to replace a T yoke, the safest approach is to compare the drive shaft size and the coupling dimensions. If you cannot find the exact equivalent, contact us with the part number or the dimensions of the original part.

If you need a T yoke for your drive shaft, send us the drive shaft size on WhatsApp (for example, 3065 or 3075) or a photo of the flange. At MR Accesorios Industriales we reply promptly with the alternative that best suits your transmission.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.