Official distributor
NTN tapered roller bearings, 302 series: dimensions and part numbers
The NTN 302 series of tapered roller bearings brings together 18 part numbers in our catalogue across 18 basic sizes, from 30216 to 30248: bore (d) from 80 to 240 mm and outside diameter (D) from 140 to 340 mm. Every part number in the table links to its own page, where you can request a quote via WhatsApp or email.
302 series dimension table
| Basic designation | d | D | T | Same size | Variants |
|---|---|---|---|---|---|
| 30216 | 80 | 140 | 28.25 | 80x140x28.25 | |
| 30217 | 85 | 150 | 30.5 | 85x150x30.5 | |
| 30218 | 90 | 160 | 32.5 | ||
| 30219 | 95 | 170 | 34.5 | ||
| 30220 | 100 | 180 | 37 | 100x180x37 | |
| 30221 | 105 | 190 | 39 | ||
| 30222 | 110 | 200 | 41 | ||
| 30224 | 120 | 215 | 43.5 | ||
| 30226 | 130 | 230 | 43.75 | ||
| 30228 | 140 | 250 | 45.75 | ||
| 30230 | 150 | Dimension not validated | Dimension not validated | ||
| 30232 | 160 | Dimension not validated | Dimension not validated | ||
| 30234 | 170 | Dimension not validated | Dimension not validated | ||
| 30236 | 180 | Dimension not validated | Dimension not validated | ||
| 30238 | 190 | 340 | 60 | ||
| 30240 | 200 | Dimension not validated | Dimension not validated | ||
| 30244 | 220 | Dimension not validated | Dimension not validated | ||
| 30248 | 240 | Dimension not validated | Dimension not validated |
Every part number in this series carries a suffix after the basic designation. The most frequent NTN suffixes, with the number of sizes they appear in: U (9), UUTG (5), U3EB (2), and UTG (2). The suffix defines the variant (sealing, cage, internal clearance or other options): to request a quote, send us the full part number marked on the bearing, the box or the drawing.
How to read the part number: 302 gives the bearing type and the dimension series; for the same bore, each series has a different outside diameter and width. What follows is the bore code: from 04 upwards, multiplying by 5 gives the bore in millimetres (in the 30216, 16 × 5 = 80 mm).
The table gives the boundary dimensions of each basic designation according to ISO 355, in millimetres: d is the bore, D the outside diameter and T the total width. These are standardised dimensions: the same basic designation has the same dimensions in every brand. Where a dash appears, the dimension has not been validated yet: we confirm it when we quote.
If the part number on the bearing can no longer be read, measure the bore, the outside diameter and the total width, and find the matching row: with that size and the variant you need, we will quote it.
Other NTN tapered roller bearings series
Which NTN 302 series bearing do you need?
Send us the full part number, or the size and the variant, with the quantity: we will quote it via WhatsApp or email.