Skip to content
All products

Exclusive representative in Argentina

BGL inch adapter sleeves

BGL inch adapter sleeves address a common maintenance situation: the shaft has an imperial dimension while other assembly parts may be documented in another unit. The aim is to retain the original measurement and relate it to the correct bearing, without an approximate fraction conversion. Within BGL, this selection differs from the general sleeve list by its identification of an inch mounting.

See all BGL bushings and sleeves references →BGL guide →Adapter sleeves in inches from all brands →BGL adapter sleeves →BGL hydraulic sleeves →

Identifying the designation

HE31/500, HA2340 and HS2340 belong to this line. The first contains a prefix, series block and slash; the others combine letters with a continuous numeric block. HA and HS share numbers here, but that does not establish the same shaft diameter. The HE slash must not be read as an inch fraction. Copy each complete designation and record shaft diameter separately with its unit.

Application and machine position

On an imperial conveyor shaft, fan or roller repaired from an old drawing, inspect the actual seat before identifying a replacement. Compare the drawing's nominal dimension with an intact shaft area, the bearing's tapered bore and occupied axial length. State whether a value comes from measurement or a plate. This distinction helps when wear, rounded conversions or records from different periods affect the same equipment.

Information for a quote

Send MR Accesorios Industriales the code, shaft diameter in its original unit, length and photographs of sleeve and bearing. Include application, quantity and retained nut and washer references. If metric and imperial measurements are both known, send them separately with their origin; do not silently replace a fraction with a rounded value.

Is the final number an inch dimension?

Do not read it that way. The reference locates the part; shaft diameter is confirmed through documentation or an identified measurement.

Can I search using a converted measurement?

Conversion may help comparison but does not determine selection. Retain the original value, unit and bearing code.

Why photograph the nut?

Its identification and position show part of the axial retention and help check the components accompanying the sleeve.

Products 53 results

Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.

Ask via WhatsAppAsk via email

Main series

BGL Inch Adapter Sleeve

The BGL inch adapter sleeve is a mounting component that allows tapered bore bearings to be secured on plain shafts, without the need for a shoulder or special machining. It is supplied complete, with sleeve, lock nut and lock washer or MS lock, ready to install. It is a practical solution for converting a cylindrical seat into a tapered one and securing the bearing with the correct interference, simplifying the design and maintenance of rotating equipment.

Some codes:HE31/500HE31/600HE2340HE2344HE2348

Inch Adapter Sleeve BGL

The BGL inch adapter sleeve is a component that allows tapered bore bearings to be mounted on plain shafts, with no need for a shoulder. It is supplied complete with sleeve, lock nut and lock washer or MS lock. Manufactured in high-strength BGL nodular cast iron, it is a reliable solution for securing bearings in a wide variety of industrial applications.

Some codes:HA2340HA2344HA2348HA2352HA2356

Send us the BGL part number

Just the manufacturer part number is enough: we will quote it and provide dimensions and equivalents via WhatsApp or email.

Request a BGL quote on WhatsApp
Request a quote on WhatsApp