Bearings 75 x 105 x 16 mm: SKF, FAG, RKB, and TIMKEN part numbers
The MR catalog lists 6 bearing part numbers with boundary dimensions 75 x 105 x 16 mm (d x D x B), from 4 brands: SKF (3), FAG (1), RKB (1), and TIMKEN (1). Each part number in the tables links to its product page, so you can request a quote via WhatsApp or email.
Deep groove ball bearings 75 x 105 x 16 mm
6 part numbersSee all deep groove ball bearings →
They are all the same bearing type: deep groove ball bearings (6 part numbers, series 619).
4 of the 6 part numbers are the basic designation alone, without a suffix. The most frequent suffixes, with the number of part numbers they appear in: 2RS1 (1) and 2RZ (1).
These are boundary dimensions according to ISO 15, in millimetres: d is the bore, D the outside diameter and B the width.
Two bearings with the same size are not necessarily the same bearing: the type, the seals or shields, the internal clearance, the cage and the load rating depend on the designation, the suffix and the brand. That is why we quote by part number: send us the full part number shown on the bearing, the box or the drawing, or the size together with the variant you need.
If the part number can no longer be read, measure the bore, the outside diameter and the width, and look the size up in the bearings-by-size index: each size has its own page with all its part numbers.
Size tables by series
Each series with all its sizes, in its brand table:
Do you need a 75 x 105 x 16 mm bearing?
Send us the full part number, or the size with the variant you need, and the quantity: we will quote it via WhatsApp or email.