Conveyor chain TSUBAKI M 900

TSUBAKI M 900 is a conveyor chain reference, within Power transmission. Request a quote for M 900 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The TSUBAKI M series conveyor chain is a transmission component designed to move materials continuously in drag, elevation and horizontal or inclined conveying equipment. It is used in plants where the movement of bulk product or pieces requires a linkage resistant to wear and repeated stress. MR Accesorios Industriales sells it in Buenos Aires, Argentina, and helps you identify the correct pitch and variant for your equipment.

The M series designation is read by the number that accompanies the letter: M 20, M 28, M 40, M 56, M 80, M 112, M 160 and M 224 are the sizes handled in this line. That number identifies the chain size within the series and is the data that guides selection. To order it, it is enough to send the complete code as shown on the equipment or on the drawing, and from MR we cross-reference it with the corresponding variant.

In Argentine industry these chains appear in grain and by-product conveying, feed plants, aggregate handling, bucket elevators, drag conveyors in meatpacking plants and bottling lines. They are also seen in sugar mills, tanneries and treatment plants where material must be moved with the presence of dust, moisture or residues. In all those cases the working environment punishes the joint and demands a linkage that withstands the cycle without stretching.

To choose well, take into account the pitch, the working load, the drag speed and the type of lubrication the equipment allows. Check the condition of the sprockets or wheels: a new chain on worn teeth wears out prematurely. Check shaft alignment and initial tension, and verify that lubricant reaches the pins. If the equipment works with abrasive material, consider a variant with greater protection at the joint.

Between brands, interchangeability is defined by pitch, pin diameter, chain width and link geometry, not by the commercial code. That is why it is advisable to compare the complete designation and the critical dimensions before replacing one chain with another. If the equipment comes with a chain from another source, send us the code and the main measurements and we will tell you which M series variant it corresponds to.

If you need to replace a conveyor chain, send via WhatsApp the code shown on the equipment, the conveyor model or the pitch and width measurements. With that data, at MR Accesorios Industriales we quote the corresponding M series variant and support you in the selection so that the replacement is the correct one.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.