Split plummer block housing TIMKEN SNTD 30/500F

TIMKEN SNTD 30/500F is a split plummer block housing reference, within Bearing housings. Request a quote for SNTD 30/500F via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

Timken SNTD series split housings are housings split into two halves that wrap around the bearing and allow it to be mounted on the shaft without disassembling the assembly. They are used in large equipment where access is difficult and complete disassembly is not feasible. MR Accesorios Industriales carries them in Buenos Aires, Argentina, with more than 80 years of experience in power transmission and mounting.

The SNTD designation identifies the Timken split housing line. The number that follows is read in two parts: the first digits correspond to the size and series of the housing, and the suffix F indicates the construction variant. In the series examples, codes such as SNTD 3076F, SNTD 3080F, SNTD 3084F and SNTD 3092F appear, covering large shaft diameters, as well as SNTD 30/500F and SNTD 30/530F, where the slash separates the series number from the diameter. The series is grouped into the 3000 and 3100 families, and the 3100 is the one corresponding to these housings.

These housings are used in continuous process equipment: mills, rotary kilns, conveyor belts, high-flow pumps, industrial fans and paper machines. In Argentina they appear in cement, steel, oilseed, mining and aggregate processing plants, where the shaft is large in diameter and the housing works under high loads. The split construction simplifies maintenance: the upper half is removed, the bearing is inspected and it is closed again without moving the shaft or the coupling.

To select the housing, start from the shaft diameter and the bearing to be housed. The SNTD series accepts different bearing types depending on the equipment design. During mounting, verify the alignment of the two halves and the support on the base; a misaligned housing punishes the bearing and shortens its life. Sealing is key in dusty, water or oil environments: choose the labyrinth or seal suitable for the contaminant. Lubrication must reach the bearing and be renewed according to the duty cycle.

Split housings are interchanged between brands by series number and shaft diameter, but the mounting dimensions, center height and hole spacing may vary. Before replacing a housing, compare those measurements with the equipment. If you need an alternative to a part number you do not see, write to us on WhatsApp with the model or shaft measurements and we will indicate the compatible option. MR Accesorios Industriales also manufactures custom split housings.

To request a quote for a Timken SNTD series housing, send the complete part number via WhatsApp, for example SNTD 3080F, or the shaft diameter and the bearing you are going to mount. With that data we will send you the quote shortly. If the housing goes on equipment with a lot of contaminant, tell us the working conditions and we will guide you on sealing and lubrication.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.