Split plummer block housing TIMKEN SNT 200/300

TIMKEN SNT 200/300 is a split plummer block housing reference, within Bearing housings. Request a quote for SNT 200/300 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

Timken SNT series split bearing housings are split housings that allow bearings to be mounted and removed without disassembling the shaft or the transmission. They are used to support rotating shafts in equipment where maintenance is done on site, with limited access. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina, and helps you identify the right size for the bearing you are going to house.

The SNT series designation is read by the size range it groups: SNT 200/300, SNT 500/600 and SNT 3000/3100 cover different families of shaft and bearing diameters. The number that follows SNT is not a direct measurement, but a size code that must be cross-referenced with the manufacturer's table to know which bearing it accepts. That is why, when requesting a quote, it is best to provide the complete code and the bearing you plan to mount.

These housings are found in conveyors, pumps, fans, mixers and process lines where the shaft works with radial loads and some axial load. In food, cement, mining and aggregate processing plants in Argentina, the split design simplifies replacement: the cap is opened, the bearing is changed and it is closed again without moving the shaft. They are also used in older equipment where the original housing is no longer available as a whole.

To choose correctly, take into account the shaft diameter, the bearing to be housed and the type of sealing the environment requires. SNT housings accept different seals: labyrinth, radial shaft seal or grease, depending on contamination and speed. Mounting requires resting both halves on a flat surface, aligning the shaft and tightening the bolts evenly. Lubrication is done through the channel provided in the cap, and it is advisable to check the clearance after the first hours of operation.

As for interchangeability, split housings of this type can usually be cross-referenced between brands by series number and bearing size, but there is no universal equivalence: each manufacturer has its own table. If the original housing has no visible brand, it can be identified by the shaft size and the bearing it houses. MR Accesorios Industriales can help you with that cross-reference if you send us that data.

If you already have the housing code or the bearing that goes inside, send it by WhatsApp to MR Accesorios Industriales and we will quote you promptly. You can also write to us if you need a variant that is not listed: with the model or the dimensions we will guide you to find the Timken SNT series housing that matches your equipment.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.