Tapered roller bearing cup TIMKEN M84510

TIMKEN M84510 is a tapered roller bearing cup reference, within Bearings. Request a quote for M84510 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The TIMKEN tapered roller bearing cup is the outer ring of a separable bearing: it is press-fitted into the housing and forms the raceway for the cones and rollers. It is used in equipment with combined radial and axial loads, and where rigidity and fine adjustment are required. At MR Accesorios Industriales we quote it by code, together with the corresponding cone, to assemble the complete set.

The M series designation is read from the code engraved on the cup. Examples M12610, M38510, M38511, M38514, M84210, M84510, M86610 and M88010 show the M prefix followed by a series number and a suffix that identifies the cup within that family. The TS series groups single-row tapered roller assemblies. To order the correct cup, provide the complete code as it appears on the part or on the equipment drawing.

These cups are found in gearboxes, drive shafts, conveyor rollers, earthmoving equipment, presses and agricultural machinery. In the Argentine market they appear in industrial plant maintenance, road and agricultural machinery repair shops, and in equipment manufacturers that assemble their own sets. The cup-cone combination allows replacing only the worn part and preserving the rest of the mounting.

To select a cup, start from the cone you already have or from the assembly you want to build: the cup and cone are chosen as a pair, not separately. Check the angle and series, the sealing type of the assembly, the axial clearance required by the equipment and the intended lubrication. During mounting, the cup seats under pressure in the housing, taking care not to damage the raceway; alignment between both supports is key for the bearing to work evenly.

Tapered roller cups are interchanged between brands by equivalence of dimensions and angle, not by code. If the original code is not available, the compatible cup is sought by dimensions and series. At MR Accesorios Industriales we indicate the alternative that corresponds to your assembly and, if necessary, we manufacture it to measure. Send us the cup and cone code via WhatsApp and we will quote it promptly.

To close the order, have at hand the code engraved on the cup, the cone code if you have it, and a photo or sketch of the mounting. With that data we quote the TIMKEN cup or the compatible alternative, and advise you on assembling the set. Write to us via WhatsApp and we will reply promptly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.