TIMKEN M241547C tapered roller bearing cone

TIMKEN M241547C is a reference of tapered roller bearing cone, within Bearings. Request a quote for M241547C via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The cone is the inner ring of a tapered roller bearing, the part that mounts on the shaft and, together with the cup, completes the assembly. Its tapered geometry allows it to absorb combined radial and axial loads, something other bearings cannot achieve with the same efficiency. It is used in applications with significant loads and controlled misalignment, such as gearboxes, machine shafts and transmission equipment.

The designation of this line is read from its alphanumeric structure: the initial letter M and the numeric block identify the size and geometry of the cone, while the final letter C indicates a design variant within the family. A concrete example is M241547C, where the set of digits defines the dimensions of the inner ring and the final C distinguishes the version. To choose the correct cone, that code must be cross-referenced with the corresponding cup, since both form an inseparable pair.

In Argentine industry, tapered roller bearings appear in gearboxes and gear cases, machine tool shafts, material handling equipment, industrial vehicle transmissions and agricultural machinery. They are also found in process pumps and lifting systems, where the combination of radial and axial load is constant. MR Accesorios Industriales sells this TIMKEN line for those sectors, with technical support to identify the cone-cup pair that corresponds to each piece of equipment.

To select correctly, you must define the radial and axial load that the shaft supports, the rotation speed and the type of lubrication planned. Assembly requires verifying the alignment of the shaft and the housing, because the tapered roller is sensitive to angular misalignment. Lubrication must be suitable for the operating regime and the available sealing, and internal clearance is adjusted according to the assembly: in paired configurations it is precisely calibrated to avoid excessive preload or clearance that generates vibration.

Tapered roller bearings are interchanged between manufacturers by part number and by standardized dimensions, but the cone-cup pair must respect the original geometry of the equipment. When there is no direct equivalent, a combination from another brand that replicates the assembly dimensions can be used. In all cases, it is advisable to validate the complete code before replacing, because a suffix variant can change the internal design.

If you have the code of the cone or the cone-cup assembly, send it by WhatsApp to MR Accesorios Industriales and we will quote it promptly. We can also indicate the compatible alternative if you need to replace an existing reference. At MR Accesorios Industriales we work so you can find the right part without hassle.