Tapered roller bearing cone TIMKEN LM67048

TIMKEN LM67048 is a tapered roller bearing cone reference, within Bearings. Request a quote for LM67048 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The TIMKEN LM series tapered roller bearing cone is the inner race of a separable bearing: it includes the cone, the cage and the rollers, and is mounted on the shaft. It is combined with a cup (outer race) to form the complete assembly. The LM series covers inch dimensions and is used in applications that combine radial and axial loads with high demands.

The LM series designation reads as a size code: the letters identify the family and the following numbers, the size and variant. In the examples LM11749, LM11949, LM12749, LM29748, LM29749, LM48548, LM48549 and LM67043, each reference corresponds to a different cone. The TS suffix identifies the associated cup series. To choose, you must read the complete part number and respect the combination with its cup.

These cones are used in equipment where there are combined loads and moderate misalignment: gearboxes, transmission cases, road machinery axles, earthmoving equipment, conveyors, mills, presses and agricultural machinery. In Argentina they appear in plant maintenance, repair shops and equipment manufacturing. The LM series covers inch dimensions and is common in machines of American or European origin.

To select the right cone, start from the complete part number and the cup that accompanies it. Check the shaft diameter, the width and the required load capacity. During mounting, take care with raceway alignment, axial clearance and lubrication: an adequate film of grease or oil extends the life of the assembly. Sealing prevents the entry of contaminants, especially in dusty or wet environments.

Tapered roller bearings are interchanged between brands by dimensional and designation equivalence, not by internal code. If the original cone is not available, it can be replaced by another with the same diameter, width and contact angle. At MR Accesorios Industriales we tell you the compatible alternative or manufacture it to measure if necessary. The LM series has multiple references and substitutions between manufacturers are common.

If you have the cone or cup part number, send it via WhatsApp to MR Accesorios Industriales and we will quote it promptly. You can also ask about the complete series, the associated cup or the assembled bearing. With more than 80 years in the business, at MR we know the applications of the LM series and help you resolve the replacement.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.