Tapered roller bearing cup TIMKEN LM29711

TIMKEN LM29711 is a tapered roller bearing cup reference, within Bearings. Request a quote for LM29711 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The TIMKEN LM series tapered roller bearing cup is the removable outer race of a tapered roller bearing. It is press-fitted into the housing and pairs with the cone (inner race and rollers) to support combined radial and axial loads. It is used in wheel hubs, gearboxes, drive shafts and industrial equipment that demands high load capacity and rigidity. MR Accesorios Industriales supplies this line as an official brand.

The LM series designation is read from its base code and suffixes. In examples LM11710, LM11910, LM11919, LM12710, LM12711, LM29710, LM29711 and LM48510, the LM prefix identifies the tapered roller cup family. The following digits define the size and proportions of the cup. The TS series groups these components within the TIMKEN line. To order the correct cup, provide the complete code shown on the bearing or on the drawing.

TIMKEN LM series tapered roller cups are used in commercial vehicle wheel hubs, agricultural machinery, gearboxes, reducers, drive shafts and earthmoving equipment. In the Argentine market, they are commonly found in fleet maintenance, grain processing plants, oilseed industries and road machinery workshops. Their tapered geometry allows them to absorb radial and axial loads in a single direction, so they are usually mounted in opposing pairs to provide full shaft support.

To select the correct cup, consider the outer diameter and the race width, which must match the housing. The cup is press-fitted into the support; it is advisable to verify alignment with the cone and adjust axial clearance according to the equipment manual. Proper lubrication and sealing prevent contamination and extend service life. If mounting in wheel hubs, follow the manufacturer's procedure for tightening and preload.

TIMKEN LM series cups can be interchanged with equivalent components from other brands that follow the same designation and dimensions. Interchangeability depends on the cone and cup being of the same series number and manufactured under equivalent standards. When requesting a quote, provide the complete code and, if possible, the original bearing series number. MR Accesorios Industriales advises you to find the cup compatible with your application.

If you need a TIMKEN LM series tapered roller cup, write to us on WhatsApp with the code shown on your equipment or drawing. We will quote you promptly. We can also help you identify the correct reference if you provide the housing and cone measurements. MR Accesorios Industriales supplies this line as an official brand and has more than 80 years of experience in the industry.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.