TIMKEN LM12710 tapered roller bearing cup

TIMKEN LM12710 is a reference of tapered roller bearing cup, within Bearings. Request a quote for LM12710 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The TIMKEN LM series tapered roller bearing cup is the removable outer race of a tapered roller bearing. It is press-fitted into the housing and pairs with the cone (inner race and rollers) to support combined radial and axial loads. It is used in wheel hubs, gearboxes, drive shafts and industrial equipment that demands high load capacity and rigidity. MR Accesorios Industriales sells this line.

The LM series designation is read by its base part number and its suffixes. In the examples LM11710, LM11910, LM11919, LM12710, LM12711, LM29710, LM29711 and LM48510, the LM prefix identifies the family of tapered roller cups. The following digits define the size and proportions of the cup. To order the correct cup, provide the complete part number shown on the bearing or on the drawing.

TIMKEN LM series tapered roller cups are used in commercial vehicle wheel hubs, agricultural machinery, gearboxes, reducers, drive shafts and earthmoving equipment. In the Argentine market, they are commonly found in fleet maintenance, grain plants, oilseed industries and road machinery workshops. Their tapered geometry absorbs radial and axial loads in one direction, so they are usually mounted in opposed pairs to give full support to the shaft.

To select the correct cup, take into account the outer diameter and the race width, which must match the housing. The cup is press-fitted into the support; it is advisable to check alignment with the cone and adjust axial clearance according to the equipment manual. Proper lubrication and sealing prevent contamination and extend service life. If mounting in wheel hubs, follow the manufacturer's procedure for tightening and preload.

TIMKEN LM series cups can be interchanged with equivalent components from other brands that follow the same designation and dimensions. Interchangeability depends on the cone and cup being of the same series number and manufactured under equivalent standards. When requesting a quote, indicate the complete part number and, if possible, the series number of the original bearing. MR Accesorios Industriales advises you to find the cup compatible with your application.

If you need a TIMKEN LM series tapered roller cup, write to us on WhatsApp with the part number shown on your equipment or on the drawing. We will quote you shortly. We can also help you identify the correct reference if you send us the housing and cone measurements. MR Accesorios Industriales sells this line and has experience in the field.