Tapered roller bearing TIMKEN JP10049/JP10010

TIMKEN JP10049/JP10010 is a tapered roller bearing reference, within Bearings. Request a quote for JP10049/JP10010 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

TIMKEN JP series tapered roller bearings are assemblies made up of a cone and a cup that work with radial and axial loads in one direction. Their tapered roller design allows linear contact that distributes the load better, which is why they are used in applications with combined forces and where high load capacity is needed. They are available in different sizes and are chosen according to diameter, width and mounting type.

The JP series designation reads as a pair of numbers that identify the cone and the cup. For example, in JP6049/JP6010 the first code corresponds to the cone and the second to the cup; the same happens with JP7049/JP7010 or JP10049/JP10010. The numbers following the JP prefix indicate the size and dimensional series, and the final suffix distinguishes the cup. Each assembly comes with its specific pair, so it is best to order the complete code so that the combination is correct.

In Argentine industry, these bearings are used in power transmission equipment, such as gearboxes, gear cases, road machinery shafts, mills and conveyors. They also appear in automotive and railway applications where there are combined loads and rigidity is required. Being tapered rollers, they support axial thrust well in one direction, so they are mounted in opposed pairs when there are forces in both directions.

To select the correct bearing, take into account the shaft diameter, the total width of the assembly and the type of sealing or lubrication the equipment needs. Mounting requires careful alignment and adjustment of axial clearance or preload according to the equipment manual. Lubrication can be grease or oil, and it is key to keep the housing clean to avoid contamination. If the equipment works with vibrations or variable loads, it is advisable to periodically check the clearance and the condition of the raceways.

Regarding equivalents, tapered roller bearings are identified by the cone and cup code, and different brands may offer similar sizes. To replace a TIMKEN with another brand, you must verify that the dimensions and load capacity are equivalent, and that the contact angle is compatible. It is not enough for the diameter to match: the width and fillet radius also matter. If you have doubts, send us the original code and we will indicate the compatible alternative.

MR Accesorios Industriales supplies the TIMKEN brand and can advise you to choose the right bearing. If you need a quote for the JP series, send the complete code by WhatsApp along with the shaft measurements and the type of application. We will reply promptly with availability and the options that best suit your equipment.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.