Tapered roller bearing cone TIMKEN JHM516849

TIMKEN JHM516849 is a tapered roller bearing cone reference, within Bearings. Request a quote for JHM516849 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The cone is the inner component of a tapered roller bearing: it combines the inner raceway, the rollers and the cage. It is matched with a cup of the same basic number to form the complete assembly. The TIMKEN JHM series is used in applications that combine radial and axial loads with high demands, such as transmission cases, gearboxes and earthmoving equipment. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina.

The JHM designation identifies a family of TIMKEN tapered roller cones. The number that follows the JHM prefix is the basic number: examples such as JHM33449, JHM88540, JHM318448, JHM516849, JHM534149, JHM720249, JHM807045 and JHM840449 share that scheme. Each basic number has its corresponding cup; the cone and the cup are ordered separately and assembled as a set. To identify your part, send the complete code shown on the bearing or in the equipment manual.

These cones are used in Argentine industries such as metallurgy, cement, mining and food processing. They are found in speed reducers, gearboxes, roller shafts, rotary kilns, conveyor belts and road equipment. Also in the agro-industrial sector, in seeders and combine harvesters, where combined loads and demanding working conditions require robust bearings with controlled maintenance.

To select the correct cone, take into account the radial and axial load, the rotation speed and the type of lubrication. Mounting requires cleanliness, alignment and a defined preload or axial clearance according to the equipment. Proper sealing and lubrication extend service life. If you are replacing a bearing, verify the basic number and the associated cup; if in doubt, consult us with the code and the shaft dimensions.

Tapered roller bearings are manufactured under dimensional standards that allow interchangeability between brands. A TIMKEN cone can be replaced by the equivalent from another brand if the basic number, dimensions and contact angle match. Not all codes are interchangeable with each other: the cup and the cone must correspond to the same basic number. If you need an alternative, we will indicate the compatible option.

MR Accesorios Industriales supplies the TIMKEN line of tapered roller cones in Buenos Aires, Argentina. If you are looking for a code from the JHM series, send us the complete number on WhatsApp and we will quote it shortly. We can also advise you on the corresponding cup and mounting accessories.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.