Tapered roller bearing TIMKEN JD6549/JD6510

TIMKEN JD6549/JD6510 is a tapered roller bearing reference, within Bearings. Request a quote for JD6549/JD6510 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The TIMKEN JD series tapered roller bearing is a separable bearing consisting of a cone (inner ring with rollers and cage) and a cup (outer ring). It is designed to withstand combined radial and axial loads, thanks to the linear contact of its rollers and the angle of its raceways. It is used in applications requiring high load capacity and rigidity, such as gearboxes, machine shafts and industrial equipment.

The JD series designation is read as a cone and cup assembly: the first code identifies the cone and the second the cup. For example, JD6549/JD6510 indicates cone JD6549 and cup JD6510. Suffixes that may appear in the designation (additional letters) usually indicate variations in cage design, contact angle or surface finish. To select the correct assembly, it is essential to respect the cone-cup combination specified by the manufacturer, since the raceways are ground as a set to ensure proper contact and clearance.

In Argentine industry, TIMKEN JD series tapered roller bearings are used in a wide variety of equipment: gearboxes, reducers, drive shafts, machine tools, mining equipment, cement plants, food and beverage plants, and automotive applications. Their ability to withstand combined loads and their rigidity make them suitable for assemblies where the shaft must remain aligned under varying loads. MR Accesorios Industriales supplies this brand to serve the country's main industrial sectors.

To select the correct bearing, take into account the radial and axial load it must withstand, the rotational speed, the type of lubrication (grease or oil) and the sealing system. Installation requires careful alignment and proper axial adjustment: excessive or insufficient internal clearance can reduce service life. Lubrication must be as specified by the manufacturer, and it is important to check the condition of the seals to prevent contamination. In assemblies with two bearings, it is recommended to adjust axial clearance according to the equipment specifications.

Tapered roller bearings are interchangeable between brands as long as the main dimensions (bore, outer diameter and width) and contact angle are respected. However, cones and cups from different manufacturers must not be mixed, since tolerances and raceway grinding may vary. When requesting a quote, provide the complete part number (for example, JD6549/JD6510) and, if possible, the dimensions or the original equipment part number to ensure the correct equivalent.

If you need this bearing or its equivalent, write to us on WhatsApp with the part number or model you are looking for. At MR Accesorios Industriales we will quote you shortly and indicate the compatible alternative if necessary. With more than 80 years of experience, since 1945, we support Argentine industry with power transmission products and bearings from leading brands.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.